How to wash
Starting the programme
1. Check that the water tap is open.
2. Press START/PAUSE to start the programme.
DOOR If the Delay Start option has been selected the programme will start at the end of the countdown.
At the start of the programme, if the “END” light blinks for few min- utes, the acoustic signal sounds and on the display appears E40, that indicates that the door is open. Close the door and press the START/PAUSE button again.
If the delay start option has been selected, the machine starts its countdown, in hours, which will appear on the display. During this period it is possible to load other laundry, to cancel the delay time.
•Load other laundry: press the START/PAUSE button. Open the door. Load the laundry. Close the door and press the START/PAUSE button again.
•Cancel the delay time: press the START/PAUSE button. Press the DELAY TIMER button until on the display appears 0’, if you wish to cancel it. Press the START/ PAUSE button again to let the pro- gramme restart.
Programme progress display
By selecting the wash programme, the pilot lights corre- sponding to the various phases making up the programme come on. After the machine has started, only the running phase pilot light stays on.
Display
The time to the end of the programme decreases minute by minute and appears on the display.
WASH
RINSE
RINSE +
SPIN
DRYING
END
OVER DOSING
DOOR
REMAINING
TIME
28