Electrolux 16830 manual Problem Possible cause, Water inlet hose is

Page 39

Something not working?

Problem

Possible cause

Solution

The machine does not work

The machine does not fill

The machine fills then empties immediately

The machine does not empty and/or does not spin

The main electrical fuse or

Replace the fuse.

the fuse in the plug has

 

blown.

 

The door is not properly

Close the door; the click

closed (E40).

of the lock should be heard.

The plug is not connected.

Insert the plug.

The START button has not

Press the button.

been pressed.

 

The DELAYED START

Check the selected delay on

option has been selected.

the display.

The water tap is closed (E10).

Open the water tap.

The water inlet hose is

Check the whole length of the

squashed or kinked (E10).

hose and remove the kink.

The small filter of the water

Clean the filter.

inlet hose is clogged (E10).

 

The door is not properly

Close the door.

closed (E40).

 

The end of the drain hose

Place the hose at the right

is too low.

height (see Installation

 

section).

The drain hose is

Check the whole length of

squashed or kinked (E20).

the hose and remove the

 

kink.

The drain pump or the

Clean the pump or check

drain hose are clogged (E20). the hose.

The RINSE HOLD option

Empty out the water by

(stop with water in drum)

selecting the DRAIN or

has been selected.

SPIN programme.

The laundry is not evenly

Redistribute the laundry

distributed inside the drum.

manually in the drum.

39

Image 39
Contents Lavamat Turbo Dear customer Contents Automatic washing and drying NON-STOP programme Programme charts wash and special programmesPage Safety instructions General safetyInstallation During use Child safetyMachine DisposalTips for environmental protection Packaging materialsMain features of your washer-dryer Front view Description of the applianceProgramme selector dial Control panelProgramme Option buttons Position 40C Easy ironPosition Cold = cold wash START/PAUSE button StartPause Display Delay Timer buttonElectronic Drying button Drying Time buttonCancelling a programme Programme progress displayAltering a programme which is running Opening the door after the programme has started Before the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleSynthetics Sort of laundry Approximate Dry weightsTypes of fabric and care labels CottonDelicates 40 Which detergent? Detergents and additivesTraditional Powders Which form?Sort of laundry Preparing the drying cycleLoad Garments not suitable for dryingFibre residue Drying symbols on garment labelsDuration of the drying cycle Modification of the drying time or degree of dryingAdd detergent and additive How to washMax. load Load the laundrySelection of the desired options Selection of the desired wash programmeSelection of the Rinse + extra rinse option Selection of the Delay Timer optionStarting the programme At the end of the programme Drying only Max. load How to dryAutomatic washing and drying NON-STOP programmeWash programmes Programme chartSpecial programmes DescripMax Consumption Tion 900 Timed DryingDegree of drying Max. load Spin speed Drying timeMax Water Energy Duration Load Litres KWh Consumption data for timed dryingAfter each wash Cleaning and maintenanceMaintenance Wash Periodical cleaning ExteriorDrain pump Door sealEmergency emptying out Water inlet filterFrost precautions TroubleshootingSomething not working? Water inlet hose is Problem Possible causeProblem Possible cause Solution E10 DistributedWhite residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseThis appliance complies with the following EC directives Technical dataService & Spare Parts Service & Spare Parts08705 929 Customer care Help us to help youExclusions Standard Guarantee ConditionsEuropean Guarantee Safety instructions for the installer Instructions for installation and electrical connectionDimensions of the appliance Front view and side viewRear view Unpacking InstallationInstallation on a suspended floor PositioningLevelling Into a drainage standpipe Water inlet cold water connection onlyWater drainage Do not connect to a hot water supplyOnto a sink outlet spigot Electrical connections Interest of the environmentPermanent connection Electrolux plc