Electrolux 16830 manual Installation, Unpacking

Page 50

Installation

Unpacking

All transit bolts and packing must be removed before using the appliance.

Using the supplied spanner, unscrew

and remove the 2 rear bottom screws.

Slide out the 2 plas-

tic pins. Lay the machine on its back, taking care not to

squash the hoses. P1129 This can be avoided

by placing one of the corner packing pieces between the machine and the floor.

Remove the polystyrene block from the bottom of the machine and release the two plastic bags.

Carefully slide out the left-hand bag removing it towards the right and then downwards.

P0001

1 2

3

P1124

Slide out the right-hand bag removing it towards the left and then upwards.

The bottom cover		2
plate, which can		2
be found inside
the machine with
the instruction
book, will now		1	A
need to be fitted.		1
Hook the bottom
of the plate 'A',	P1204		P1205
of the plate 'A',

into position first. Then push the other end of the plate into position.

Important!

You can find more detailed instructions regarding the bottom cover assemblig in its relative bag.

50

Image 50

Contents Lavamat Turbo Dear customer Contents Programme charts wash and special programmes Automatic washing and drying NON-STOP programmePage Installation Safety instructionsGeneral safety Child safety During usePackaging materials DisposalTips for environmental protection MachineMain features of your washer-dryer Description of the appliance Front viewControl panel Programme selector dialPosition Cold = cold wash Programme Option buttonsPosition 40C Easy iron Pause START/PAUSE buttonStart Drying Time button Delay Timer buttonElectronic Drying button DisplayAltering a programme which is running Cancelling a programmeProgramme progress display Opening the door after the programme has started Detergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryCotton Sort of laundry Approximate Dry weightsTypes of fabric and care labels SyntheticsDelicates 40 Detergents and additives Which detergent?Which form? Traditional PowdersGarments not suitable for drying Preparing the drying cycleLoad Sort of laundryModification of the drying time or degree of drying Drying symbols on garment labelsDuration of the drying cycle Fibre residueLoad the laundry How to washMax. load Add detergent and additiveSelection of the desired wash programme Selection of the desired optionsSelection of the Delay Timer option Selection of the Rinse + extra rinse optionStarting the programme At the end of the programme NON-STOP programme How to dryAutomatic washing and drying Drying only Max. loadProgramme chart Wash programmesMax Consumption Tion Special programmesDescrip Max. load Spin speed Drying time Timed DryingDegree of drying 900Consumption data for timed drying Max Water Energy Duration Load Litres KWhPeriodical cleaning Exterior Cleaning and maintenanceMaintenance Wash After each washDoor seal Drain pumpWater inlet filter Emergency emptying outSomething not working? Frost precautionsTroubleshooting Problem Possible cause Water inlet hose isProblem Possible cause Solution Distributed E10Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundryTechnical data This appliance complies with the following EC directives08705 929 Service & Spare PartsService & Spare Parts Help us to help you Customer careStandard Guarantee Conditions ExclusionsEuropean Guarantee Instructions for installation and electrical connection Safety instructions for the installerRear view Dimensions of the applianceFront view and side view Installation UnpackingLevelling Installation on a suspended floorPositioning Do not connect to a hot water supply Water inlet cold water connection onlyWater drainage Into a drainage standpipeOnto a sink outlet spigot Interest of the environment Electrical connectionsPermanent connection Electrolux plc