12electrolux use
Programme Option buttons
Depending on the programme, different options can be combined. These must be selected after choosing the desired programme and before pressing the «Start/Pause» button.
In any case if you select an option not compatible with the already selected programme or option, the message Err will be displayed for a few seconds, and the integrated red «Start/Pause» light will start flashing.
Select the temperature
95º 60º 50º 40º 30º Temp.
Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a temperature different from the one proposed by the
Maximum temperatures are 95°C for Cottons, 60°C for Synthetics and Easy Iron, 40°C for Delicates, Wool, fabrics to be handwashed programmes, and 30°C for Silk.
Select the spin speed, Night Cycle, or Rinse Hold option
1400 900 700
Spin
Press the «Spin» button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the
Maximum speeds are:
●for all Cottons programmes: 1400 rpm;
●for Synthetics, Easy Iron, Wool and Handwash: 900 rpm;
●for delicate fabrics and Silk: 700 rpm.
Night Cycle : by selecting this option, the machine will not drain the water of the last rinse, so as not to crease the laundry.
As all spinning phases are suppressed, this washing cycle is very quiet and it can be selected at night or in times with a more economical power rate. On some programmes, the rinses will be performed with more water.
When the programme has finished, the «Start/Pause» light goes off, the display shows a flashing zero «0.00», the
«Door locked» pilot light is still alight and the door is locked to indi- cate that the water must be emptied out.
To empty out the water:
●turn the programme selector dial to «O»
●select the Drain or Spin programme
●reduce the spin speed if needed, by pressing the relevant button
●press the «Start/Pause» button
●at the end of the programme, the display shows a «0.00» flashing.
The pilot light «Door locked» goes out and the door can be opened.
Rinse Hold : by selecting this option the water of the last rinse is not emptied out to prevent the fabrics from