![](/images/new-backgrounds/1255292/25529227x1.webp)
14 electrolux use
2 hours and then by 1 hour up to a maximum of 20 hours by pressing this button.
Selecting the delayed start.
•Select the programme and the required options.
•Select the delay start.
•Press the «Start/Pause» button: the machine starts its hourly countdown.
The programme will start after the selected delay has expired.
Cancelling the delayed start
•Press the «Start/Pause» button.
•Press the «Delay» button, the symbol 0’ is displayed.
•Press the «Start/Pause» button again.
The Delay cannot be selected with Drain programme.
Display
The display shows the following information:
Duration of the selected programme
After selecting a programme, the duration is displayed in hours and minutes (for example 2.05).
The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric.
2.05
After the programme has started, the time remaining is updated every minute.
Selected drying time
After selecting a drying programme the drying time is shown in minutes or hours and minutes (max 130 mins).
After the programme has started the remaining time is updated every minute.
Washing programme phase icons
By selecting the wash programme, the washing or drying programme phase icons corresponding to the various phases making up the programme are shown in the bottom of the display.
2.05 | 2.05 |
|
After you have pressed the «Start/Pause» button and the machine
has started, the «Door locked» pilot light is on and only the phase running icon stays on.
When the programme has finished, 3 flashing zeros «0.00» appear on the display.
Delay
The selected delay (20 hours max) set by pressing the relevant button appears on the display for about 3 seconds, then the duration of the previously selected programme is displayed.
The delay time value decreases by one unit every hour and then, when 1 hour