remains, the time decreases every minute.
Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message Err is displayed for few seconds and the integrated red «Start/Pause» light starts flashing.
Alarm codes
If there is a fault, some alarm codes can be displayed, for example E20 (see paragraph “Something not working”).
E20
End of programme
When the programme has finished 3 flashing zeros are displayed, the 
(Door locked) and the «Start/Pause» lights go out and the door can be opened.
use electrolux 15
Select the Start/Pause
Start/Pause
To start the selected programme, press the «Start/Pause» button; the green pilot light stops flashing.
The «door locked» 
pilot light illuminates to indicate that the appliance starts operating and the door is locked.
The “door” 
pilot light indicates if the door can be opened:
•light on: the door cannot be opened. The appliance is running.
•light off: the door can be opened. The washing programme is finished.
To interrupt a programme which is running, press the «Start/Pause» button: the green pilot light starts to flash.
To restart the programme from the point at which it was interrupted, press the «Start/Pause» button again.
If you have chosen a delayed start, the machine will begin the countdown.
If an incorrect option is selected, an integrated red pilot light of the «Start/Pause» button flashes 3 times and the message Err is displayed for a few seconds.
0.00