Building-in
This appliance has been designed to be built into the kitchen furniture. The recess should have the dimen- sions shown in picture A.
When installing the appliance into the kitchen furniture ensure, if possible, the hoses are placed in either of the two recesses on the back of the appliance. This will help to prevent the hoses from becoming kinked or trapped. Picture AB.
In this case it is sufficient to screw in the hinges (1) and the
a) Door
The dimensions of the door should be:
- width
The height
35 Ø |
|
| |
16 |
| B |
|
- |
| ||
| 22 |
|
|
|
| 416 | C |
|
| 22+1,5 | |
|
|
| |
|
| 595 |
|
P0422S |
|
| C |
Preparation and assembly of the door
The machine is originally
b) Hinges
To mount the hinges it is necessary to drill two holes (dia. 35 mm, depth 12.5- 14 mm depending on the depth of door furniture) on the inner side of the door. The distance between the holes hobs fixing centres must be 416 mm.