Installation
Unpacking
All transit bolts and packing must be removed before using the appliance.
You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.
1.Using a spanner unscrew and remove the rear right bolt. Lay the machine gently on its back, making sure that the hoses are not squashed.
P0255 |
2.Remove the polystyrene base and take off the bottom panel by unscrewing the central screw..
P0457 |
installation | electrolux | 37 |
P0015 |
|
|
4.Repeat the operation for the left and central polythene bags.
P0016 |
5.
P0453 |
6.Set the machine upright and remove the two remaining bolts from the back.
3.Carefully slide out the right polythene bag.