Electrolux 50815 manual Where to install, Making the appliance level

Page 29

Connect the water inlet hose as described under the paragraph “Water inlet”.

Where to install

Important! The washing machine must not be operated in a room where there is a danger of frost. There is a risk of frost damage or ad- verse effect on the perfomance of the machine. Frost damage is not covered under the warranty.

•The surface on which the appliance is to be installed must be firm and level. Do not install the appliance on carpeted floors or soft floor coverings.

•The surface on which the appliance is to be installed must be clean and dry and free from grease, so that the appliance does not slide.

•If the location in which the appliance is to be installed is fitted with small-format tiles, put a rubber mat (available in the shops) under the appliance.

Making the appliance level

The four feet of the appliance are pre-adjusted.

Large degrees of unevenness can be compensated for by individually ad- justing the height adjustable screw feet.

Use the special spanner supplied to do this.

Important! Do not use pieces of wood, cardboard or such like to lev- el out unevenness in the floor, but adjust the height adjustable screw feet instead.

29

Image 29

Contents Lavamat Dear Customer Following symbols are used in the textContents Safety information concerning installation Installation and connection instructionsPrior to using the appliance for the first time SafetyChild safety Follow the Installation and connection instructionsResulting overheating may constitute a fire hazard General safetyControl panel Description of the applianceDrain Programme overviewApplication/Features Care Symbols1 Preparing and sorting washing Before the first washPreparing washing Sorting washingOpening the door/loading washing Running a wash cycleAdding detergent/conditioner Open the door pull the handle on the doorWashing powder/tablets for the main wash cycle Switching on the appliance/selecting a programmeIf you are using liquid detergent Shortened wash programme for lightly soiled washing Changing the spin speed/selecting rinse holdProgramme Option Buttons Activating/deactivating RINSE+ Setting the delay timerActivating RINSE+ Deactivating RINSE+Interrupting a programme/adding washing Starting a programmeWashing cycle complete/Removing the washing Interrupting a programmeIf Rinse Hold has been selected Child safety deviceDeactivating the child safety device Cleaning procedure Cleaning and maintenanceDetergent dispenser drawer Washing drumClean the glass in the door and the rubber collar regularly Remedying small faults yourselfWhat to do if Door and rubber collarClean it Foam can still be seen following the final rinse If the wash result is not satisfactoryThere are grey stains on the washing There are white residues on the washing When the water has all drained awayCarrying out an emergency drain Drain pump Old appliance DisposalPackaging material Consumption values Technical dataThis washing machine cannot be built-in Safety information concerning installationWhen using a sack trolley to transport the washing machine Installing the applianceTransporting the appliance UnpackingPage Remove the bracket D Refit the six smaller bolts C Making the appliance level Where to installElectrical Connection Brown Live Wire coloured green and yellowPermanent Connection Connecting to the water supplyPermitted water pressure If more than 10bar Connect a pressure reduction valveOpen the porthole and extract the inlet hose Water inletWater Drainage For drainage into an outlet From your Service Force CentrePumping heights of over 1 metre Great Britain E. Abu Dhabi Jordan Malta Estonia Latvia Poland LU4 9QQ European GuaranteeMagyarország +36 Customer Care 0870 5 929For general enquiries concerning Major Appliances132 978 Subject to change without notice