Electrolux 50815 manual Changing the spin speed/selecting rinse hold, Programme Option Buttons

Page 13

Changing the spin speed/selecting rinse hold

The washing machine suggests the maximum permitted spin speed suitable for the selected pro- gramme. You can reduce this spin speed:

To do this, press the Spin/RINSE

HOLD button repeatedly until the required speed is indicated.

3The spin speed for the final spin can still be changed during the pro- gramme. To do this:

1.Press the START/PAUSE button.

2.Change the spin speed.

3.Press the START/PAUSE button again.

RINSE HOLD

With RINSE HOLD the washing is left to soak in the final rinse water. There is no final spin after the intermediate spin(s). The intermediate spin depends on the programme and cannot be changed.

Programme Option Buttons

If required, press the additional programme button(s). The corre- sponding indicator will illuminate.

PRE WASH

Warm pre-wash before the main wash that follows automatically; with intermediate spin for COTTONS/LINEN and EASY-CARES/EASY IRON, without intermediate spin for DELICATES.

TIME SAVER

Shortened wash programme for lightly soiled washing.

13

Image 13

Contents Lavamat Dear Customer Following symbols are used in the textContents Safety information concerning installation Installation and connection instructionsPrior to using the appliance for the first time SafetyChild safety Follow the Installation and connection instructionsResulting overheating may constitute a fire hazard General safetyControl panel Description of the applianceDrain Programme overviewApplication/Features Care Symbols1 Preparing and sorting washing Before the first washPreparing washing Sorting washingOpening the door/loading washing Running a wash cycleAdding detergent/conditioner Open the door pull the handle on the doorIf you are using liquid detergent Switching on the appliance/selecting a programmeWashing powder/tablets for the main wash cycle Programme Option Buttons Changing the spin speed/selecting rinse holdShortened wash programme for lightly soiled washing Activating/deactivating RINSE+ Setting the delay timerActivating RINSE+ Deactivating RINSE+Interrupting a programme/adding washing Starting a programmeWashing cycle complete/Removing the washing Interrupting a programmeDeactivating the child safety device Child safety deviceIf Rinse Hold has been selected Cleaning procedure Cleaning and maintenanceDetergent dispenser drawer Washing drumClean the glass in the door and the rubber collar regularly Remedying small faults yourselfWhat to do if Door and rubber collarClean it There are grey stains on the washing If the wash result is not satisfactoryFoam can still be seen following the final rinse Carrying out an emergency drain When the water has all drained awayThere are white residues on the washing Drain pump Packaging material DisposalOld appliance Consumption values Technical dataThis washing machine cannot be built-in Safety information concerning installationWhen using a sack trolley to transport the washing machine Installing the applianceTransporting the appliance UnpackingPage Remove the bracket D Refit the six smaller bolts C Making the appliance level Where to installElectrical Connection Brown Live Wire coloured green and yellowPermanent Connection Connecting to the water supplyPermitted water pressure If more than 10bar Connect a pressure reduction valveWater Drainage Water inletOpen the porthole and extract the inlet hose Pumping heights of over 1 metre From your Service Force CentreFor drainage into an outlet Great Britain E. Abu Dhabi Jordan Malta Estonia Latvia Poland LU4 9QQ European GuaranteeMagyarország +36 Customer Care 0870 5 929For general enquiries concerning Major Appliances132 978 Subject to change without notice