|
|
|
|
| “Restoring Factory Settings”) |
|
|
|
|
|
|
|
|
|
|
| “Invalid Entry” |
| Automatically returns to main menu |
|
|
|
|
|
|
|
NOTE:
•“*” shifts down to the next menu option
•“#” returns to the main menu
•“9” functions as the ENTER key in many cases to confirm an option
•All entered digit sequences have known lengths - 2 digits for menu option. For IP address, the "*" key represent the dot "." (Like 192.168.0.26 should be key in like 192*168*0*26). Once all of the digits are collected, the input will be processed.
•Key entry can not be deleted but the phone may prompt error once it is detected
Placing a Phone Call
Phone or Extension Numbers
There are currently two methods to make an extension number call:
a)Dial the numbers directly and wait for 4 (default) seconds.
b)Dial the numbers directly, and press # (assuming that “use # as dial key” is selected in the web configuration).
EXAMPLES:
•To dial another extension on the same proxy, such as 1008, simply pick up the attached phone, dial 1008 and then press the # or wait for 4 seconds.
•To dial a PSTN number such as 6266667890, you may need a prefix number followed by the phone number. Please check with your VoIP service provider for this information. If your phone is assigned a
Direct IP Calls
Direct IP calling allows two parties, that is, a FXS Port with an analog phone and another VoIP Device, to talk to each other in an ad hoc fashion without a SIP proxy.
Elements necessary to completing a Direct IP Call:
•Both HT503 and other VoIP Device, have public IP addresses, or
•Both HT503 and other VoIP Device are on the same LAN using private IP addresses, or
•Both HT503 and other VoIP Device can be connected through a router using public or private IP addresses (with necessary port forwarding or DMZ).
HT503 supports two ways to make Direct IP Calling:
Using IVR
1.Pick up the analog phone then access the voice menu prompt by dial “***”
2.Dial “47” to access the direct IP call menu
3.Enter the IP address using format ex. 192*168*0*160 after the dial tone.
Using Star Code
Grandstream Networks, Inc. | HT503 User Manual | Page 10 of 38 |
| Firmware 1.0.4.2 | Last Updated: 06/2011 |