Grandstream Networks user manual Configuring HT503 through Voice Prompt, Static IP Mode

Page 17

CONFIGURATION GUIDE

Configuring HT503 through Voice Prompt

DHCP MODE

Follow Table 4 with voice menu option 01 to enable HT503 to use DHCP.

STATIC IP MODE

Follow Table 4 with voice menu option 01 to enable HT503 to use STATIC IP mode, then use option 02, 03, 04 to set up HT503’s IP, Subnet Mask, Gateway respectively.

FIRMWARE SERVER IP ADDRESS

Select voice menu option 13 to configure the IP address of the firmware server.

CONFIGURATION SERVER IP ADDRESS

Select voice menu option 14 to configure the IP address of the configuration server.

UPGRADE PROTOCOL

Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose between TFTP, HTTP and HTTPS.

FIRMWARE UPGRADE MODE

Select voice menu option 17 to choose firmware upgrade mode. There are three options: 1) always check, 2) check only when pre/suffix changes, and 3) never upgrade

WAN PORT WEB ACCESS

Select voice menu option 12 to enable WAN Port Wed Access of the device configuration pages.

Grandstream Networks, Inc.	HT503 User Manual	Page 17 of 38
	Firmware 1.0.4.2	Last Updated: 06/2011

Image 17

Contents Grandstream Networks, Inc Safety Compliances Warranty Table of Figures Welcome Equipment Packaging Connecting the HT503WAN LED Power LEDLAN LED PHONE/ Line LEDSoftware Features Overview LED Hardware SpecificationMain Menu To reset the HT to take affect the new IP addressUnderstanding HT503 Voice Prompt Phone or Extension Numbers Placing a Phone CallCall Transfer Call HoldCall Waiting Pstn Pass Through Way ConferencingPSTN-to-VoIP Calls VoIP-to-PSTN CallsForward Calls to Pstn Route Calls to PstnFax Support Forward Calls to VoIPOne Stage Dialing Flash/Hook Enable Srtp Disable SrtpBlind Transfer Static IP Mode Configuring HT503 through Voice PromptAccess the Web Configuration Menu Configuring HT503 with Web BrowserDND NATFXS FXOMTZ+6MDT+5 DMZ IP Firmware Upgrade Admin PasswordLayer 3 QoS Layer 2 QoSACS URL HTTP/HTTPSLife Line Mode Disable Direct IPConfiguration Lock KeypadAuthentication Password Authenticate IDDNS mode Unregister on RebootDisable Dtmf SIP T1 TimeoutEnable Call Features Disable Call WaitingDial Plan Prefix Special FeatureUse # as Dial key Dial Plan Dial Plan RulesVAD Slic Setting Srtp ModeDisable Line Echo Canceller LECOutgoing Call Without Authenticate PasswordSIP registration failure Retry wait timeDian Plan Negotiation Proxy RequireInvite Ring-No-Answer Timeout Preferred VocoderFSK Caller ID minimum Caller ID SchemeRX Level dB FSK Caller ID SeizureEnable Pstn Disconnect Enable CurrentPstn Ring Thru Delay First Digit Timeout secConfiguration through a Central Server Saving the Configuration ChangesRebooting from Remote Software Upgrade Firmware Upgrade through TFTP/HTTP/HTTPSManaging Firmware and Configuration File Download Configuration File DownloadFirmware and Configuration File Prefix and Postfix Restore Factory Default Setting

Related manuals

Manual 14 pages 17.24 Kb