| Via HTTPS |
| The URL of the HTTP server used for firmware upgrade and configuration via a secure HTTP |
| ||
|
|
| connection. |
|
|
|
|
|
| For example, https://provisioning.mycompany.com |
|
| |
|
|
| Note: the HTTPS default port is 443. |
|
| |
|
|
|
|
|
| |
| Firmware Server |
| IP address or domain name of firmware server. |
|
| |
| Path |
|
|
|
|
|
|
|
|
|
|
| |
| Config Server Path |
| IP address or domain name of configuration server. |
|
| |
|
|
|
|
| ||
| XML Config File |
| The password used for encrypting the XML configuration file using OpenSSL. |
| ||
| Password |
| This is required for the phone to decrypt the encrypted XML configuration file. |
| ||
|
|
|
|
|
| |
| HTTP/HTTPS User |
| The user name for the HTTP/HTTPS server. |
|
| |
| Name |
|
|
|
|
|
|
|
|
|
|
| |
| HTTP/HTTPS |
| The password for the HTTP/HTTPS server. |
|
| |
| Password |
|
|
|
|
|
|
|
|
|
| ||
| Firmware File |
| Default is blank. If configured, HT503 will request the firmware file with the prefix. This |
| ||
| Prefix |
| setting is useful for ITSPs. End user should keep it blank. |
|
| |
|
|
|
|
|
| |
| Firmware File |
| Default is blank. End users should keep it blank. |
|
| |
| Postfix |
|
|
|
|
|
|
|
|
|
|
| |
| Config File Prefix |
| Default is blank. End users should keep it blank. |
|
| |
|
|
|
|
|
| |
| Config File Postfix |
| Default is blank. End users should keep it blank. |
|
| |
|
|
|
|
|
| |
| Automatic Upgrade |
| Choose “Yes” to enable automatic upgrade and provisioning. | When set to No, HT503 will |
| |
|
|
| only do upgrade once at boot up. |
|
| |
|
|
| When “Check every day” or “Check every week” is checked, user can specify “Hour of the |
| ||
|
|
|
| |||
|
|
| There are three options to choose from: “Always check for New Firmware at Boot up”, “Check |
| ||
|
|
| New Firmware only when F/W pre/suffix changes”, and “Always Skip the Firmware Check”. |
| ||
|
|
|
|
| ||
| Authenticate Conf |
| This protects the configuration from an unauthorized change. If set to “Yes, the configuration |
| ||
| File |
| file is authenticated before acceptance. |
|
| |
|
|
|
|
| ||
| Firmware Key |
| Key for firmware encryption. (32 digits in hexadecimal format. End users should keep it blank. |
| ||
|
|
|
|
| ||
| SSL Certificate |
| The user specified SSL certificate used for SIP over TLS in X.509 format. |
| ||
|
|
|
|
| ||
| SSL Private Key |
| The user specified SSL private key used for SIP over TLS in X.509 format. |
| ||
|
|
|
|
|
| |
| SSL Private Key |
| User specified password to protect the private key above. |
|
| |
| Password |
|
|
|
|
|
|
|
|
|
| ||
| ACS URL |
| User specify the Auto Configuration Server’s URL |
| ||
|
|
|
|
|
| |
| ACS Username |
| User specify the ACS Username |
|
| |
|
|
|
|
|
| |
| ACS Password |
| User specify the ACS password |
|
| |
|
|
|
|
| ||
| Periodic Inform |
| Default is No. If set to YES, device will send inform packets to the ACS |
| ||
| Enable |
|
|
|
|
|
|
|
|
|
|
| |
| Periodic Inform |
| Frequency that the inform packets will be sent out to the ACS |
|
| |
| Interval |
|
|
|
|
|
|
|
|
|
|
| |
| Connection |
| Set a user name for the ACS to connect to this device |
|
| |
| Request Username |
|
|
|
|
|
|
|
|
|
|
| |
| Connection |
| Set a password for the ACS to connect to this device |
|
| |
| Request Password |
|
|
|
|
|
|
|
|
|
| ||
| System Ring |
| Configuration option for FXS port ring cadence for all incoming calls. (Syntax: c=on1/off1- |
| ||
| Cadence |
|
|
|
| |
|
|
|
|
| ||
| Call Progress |
| Using these settings, users can configure tone frequencies according to their preference. By |
| ||
| Tones |
| default they are set to North American frequencies. |
|
| |
|
|
| These tones should be configured with known values to avoid uncomfortable high pitch |
| ||
|
|
| sounds. ON is the period of ringing (“On time” in ‘ms’) while OFF is the period of silence. In |
| ||
|
|
| order to set a continuous tone, OFF should be zero. Otherwise it will ring ON ms and a pause |
| ||
|
|
| of OFF ms and then repeat the pattern. |
|
| |
|
|
| Example for North America Dial Plan: |
|
| |
|
|
|
|
| ||
|
|
| Syntax: f1=freq@vol, f2=freq@vol, |
| ||
|
|
|
|
|
|
|
| Grandstream Networks, Inc. | HT503 User Manual | Page 23 of 38 |
| ||
|
|
|
| Firmware 1.0.4.2 | Last Updated: 06/2011 |
|