| SIP User ID |
|
| User account information, provided by VoIP service provider (ITSP), usually has the |
| |
|
|
|
| form of digit similar to phone number or actually a phone number. This field contains |
| |
|
|
|
| the user part of the SIP address for this phone. e.g., if the SIP address is |
| |
|
|
|
| sip:my_user_id@my_provider.com, then the SIP User ID is: my_user_id. |
| |
|
|
|
| Do NOT include the preceding “sip:” scheme or the host portion of the SIP address in |
| |
|
|
|
| this field. |
|
|
|
|
|
|
| ||
| Authenticate ID |
|
| ID used for authentication, usually same as SIP user ID, but could be different and |
| |
|
|
|
| decided by ITSP. |
|
|
|
|
|
|
| ||
| Authentication Password |
|
| Password for ATA to register to (SIP) servers of ITSP. Purposely left blank once saved |
| |
|
|
|
| for security. Maximum length is 25. |
|
|
|
|
|
|
| ||
| Name |
| SIP service subscriber’s name which will be used for Caller ID display |
| ||
|
|
|
|
|
| |
| DNS mode |
|
| One from the 3 modes available for “DNS Mode” configuration: |
|
|
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
| One mode can be chosen for the client to look up server. |
|
|
|
|
|
| The default value is “A Record” |
|
|
|
|
|
|
| ||
| User ID is Phone Number |
|
| If “Yes” is set, a “user=phone” parameter will be attached to the “From” header in SIP |
| |
|
|
|
| request |
|
|
|
|
|
|
| ||
| SIP Registration |
|
| This parameter controls whether the HT503 needs to send REGISTER messages to |
| |
|
|
|
| the proxy server. The default setting is “Yes”. |
|
|
|
|
|
|
| ||
| Unregister on Reboot |
|
| Default is No. If set to yes, the device will first send registration request to remove all |
| |
|
|
|
| previous bindings. Use only if proxy supports this remove bindings request. |
| |
|
|
|
|
| ||
| Outgoing Call w/o |
| This parameter allows users place outgoing calls even when not registered (if allowed |
| ||
| Registration |
| by ITSP) but it’s unable to receive incoming calls. |
|
| |
|
|
|
|
| ||
| Register Expiration |
|
| This parameter allows the user to specify the time frequency (in minutes) the |
| |
|
|
|
| HandyTone ATA refreshes its registration with the specified registrar. The default |
| |
|
|
|
| interval is 60 minutes (or 1 hour). The maximum interval is 65535 minutes (about 45 |
| |
|
|
|
| days). |
|
|
|
|
|
|
| ||
| Local SIP port |
|
| This parameter defines the local SIP port the HT503 will listen and transmit. The default |
| |
|
|
|
| value for FXS port is 5060. |
|
|
|
|
|
|
| ||
| Local RTP port |
|
| This parameter defines the local |
| |
|
|
|
| is the base RTP port for channel 0. |
|
|
|
|
|
| When configured, the FXS port will use this port _value for RTP and the port_value+1 |
| |
|
|
|
| for its RTCP. |
|
|
|
|
|
| The default value for FXS port is 5004. |
|
|
|
|
|
|
| ||
| Use Random Port |
|
| Default is No. If set to Yes, the device will pick |
| |
|
|
|
| This is usually necessary when multiple HandyTone ATAs are behind the same NAT. |
| |
|
|
|
|
| ||
| Refer to Use Target |
| Default is No. If set to “Yes”, then for Attended Transfer, the |
| ||
| Contact |
| the transferred target’s Contact header information. |
|
| |
|
|
|
|
| ||
| Transfer on conference |
|
| Default is No. In which case if conference originator hangs up the conference will be |
| |
| hangup |
|
| terminated. When option YES is chosen, originator will transfer other parties to each |
| |
|
|
|
| other so that B and C can choose either to continue the conversation or hang up. |
| |
|
|
|
|
| ||
| Enable |
|
| Default is No, this will create a |
| |
|
|
|
| transfer the call upon receiving ring back tone. |
|
|
|
|
|
|
| ||
| Disable Bellcore Style 3- |
| Default is No. you can make a Conference by pressing ‘Flash’ key. If set to Yes, you |
| ||
| Way Conference |
| need to dial *23 + second callee number. |
|
| |
|
|
|
|
| ||
| Remove OBP from Route |
| Default is No. If set to Yes, the Outbound Proxy will be removed from the route header. |
| ||
| Header |
|
|
|
| |
|
|
|
|
| ||
| Support SIP instance ID |
|
| Default is Yes. If set to Yes, the contact header in REGISTER request will contain SIP |
| |
|
|
|
| Instance ID as defined in IETF SIP Outbound draft. |
|
|
|
|
|
|
| ||
| Validate incoming SIP |
|
| Default is No. If set to yes all incoming SIP messages will be strictly validated |
| |
| message |
|
| according to RFC rules. If message will not pass validation process, call will be |
| |
|
|
|
| rejected. |
|
|
|
|
|
|
| ||
| Check SIP User ID for |
| Default is No. Check the incoming SIP User ID in Request URI. If they don’t match, the |
| ||
|
|
|
|
|
|
|
| Grandstream Networks, Inc. |
| HT503 User Manual | Page 25 of 38 |
| |
|
|
|
| Firmware 1.0.4.2 | Last Updated: 06/2011 |
|