American Dryer Corp ADG-530 HSI Hot Surface Ignition Troubleshooting Terms definitions

Page 10

TEST EQUIPMENT

The following pieces of test equipment will be required to troubleshoot this system with minimal time and effort.

MANOMETER

Used to measure gas pressure in inches of water column (W.C.)

Available from ADC - Part No. 122804

MULTIMETER/VOLTMETER

For measuring voltage and/or amperage

1.HSI (Hot Surface Ignition) TROUBLESHOOTING TERMS (definitions)

a. INTERNAL CONTROL FAILURE - HSI module “red” L.E.D. (light emitting diode)

indicator light stays on continuously. This indicates

8

Image 10
Contents Currant Road American Dryer CorporationFall River MA Retain This Manual In a Safe Place For Future Reference Table of Contents Introduction HOT Surface Ignition HSI System COMPONENTS/FUNCTIONSVAC Transformer 36E Redundant Gas Valve System basic Electrical RATINGS/SPECIFICATIONS HSI System OperationHSI System Operation Flow Chart Computer Calls For HeatTroubleshooting Normal Operation summaryHSI Hot Surface Ignition Troubleshooting Terms definitions Test EquipmentTROUBLESHOOTING/SYSTEM Diagnosis detailed Never Test for Leaks with a FlameInches W.C Terminal Designations Void the Warranty Replacement Coils are not Available 128974 128918128927 881479HSI Hot Surface Ignition System Components ADC 450401 1-05/20/97-50 2-02/25/98-50
Related manuals
Manual 44 pages 47.93 Kb