AEG L 71060 SL, L 71260 SL Temperature Button, Acoustic Signals Function, Child Lock Function

Page 11

Spin phase is off.

'Rinse Hold' function is on.

TEMPERATURE BUTTON 10

Press button 10 to change the default temperature.

-- = cold water

ACOUSTIC SIGNALS

FUNCTION

You can hear the acoustic signals when:

You activate the appliance.

You deactivate the appliance.

You press the buttons.

The programme is completed.

The appliance has a malfunction. To deactivate/activate the acoustic signals, press button 8 and button 7 at the same time for 6 seconds.

If you deactivate the acoustic signals, they continue operate only when you press the buttons and when a malfunction occurs.

CHILD LOCK FUNCTION

This function prevents children to play with the control panel.

ENGLISH 11

To activate the function, press button 10 and button 9 at the same time

until the display shows the symbol

.

To deactivate the function, press but- ton 10 and button 9 at the same

time until the symbol goes off. You can activate the function:

Before you press the Start/Pause but- ton 4 : the appliance cannot start.

After you press the Start/Pause but- ton 4 , all the buttons and the pro- gramme knob are deactivated.

PERMANENT EXTRA RINSE FUNCTION

With this function you can keep the ex- tra rinse function permanently on when you set a new programme.

To activate the function press button 6 and button 5 at the same time

until the indicator of button 7 is on.

To deactivate the function press but- ton 6 and button 5 at the same time until the indicator of button 7 is off.

Image 11
Contents SL L 71260 SL Service ContentsVisit OUR Website for Accessories and ConsumablesFor Perfect Results Installation Safety InformationGeneral Safety Care and CleaningDiscard the Appliance Water connectionEcological Hints Environment ConcernsTechnical Information Packaging MaterialsProduct Description AccessoriesProgramme Knob Control PanelOn OFF Button BCD DisplayExtra Rinse Button Delay Start ButtonSTART/PAUSE Button Time Save ButtonPermanent Extra Rinse Function Temperature ButtonAcoustic Signals Function Child Lock FunctionNo Spin ProgrammesExtra RINSE5 Standard programmes for the Energy Label consumption values Consumption ValuesLoading the Laundry Using the ApplianceBefore First USE Check the position of the flap Filling the Detergent and AdditivesInterrupt a Programme Setting and Starting a ProgrammeCancel a Programme Change a Function SET the Delay StartCancel the Delay Start AT the END of the ProgrammeEnglish Detergents and Additives Hints and TipsLaundry Load Stubborn StainsWater hardness table Level Type Mmol/l Clarke Care and Cleaning Drain Pump Detergent DispenserPage Valve Filter Inlet Hose FilterEmergency Drain Frost PrecautionsTroubleshooting Delay start is set English Unpacking InstallationPull out the plastic spacers Positioning and Levelling Inlet Hose Water Drainage Water-stop deviceEnglish 132930200-A-372011