AEG L 71060 SL, L 71260 SL user manual Inlet Hose

Page 33

ENGLISH 33

• The appliance must be level and sta- ble.

CAUTION!

Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the lev- el.

THE INLET HOSE

45O

20O

•Connect the hose to the appliance. Turn the inlet hose only left or right. Loose the ring nut to set it in the cor- rect position.

• Connect the water inlet hose to the cold water tap with 3/4 thread.

CAUTION!

Make sure that there are no leaks from the couplings.

Do not use an extension hose if the inlet hose is too short. Con- tact the service centre for the re- placement of the inlet hose.

Image 33

Contents SL L 71260 SL Service ContentsAccessories and Consumables For Perfect ResultsVisit OUR Website for General Safety Safety InformationCare and Cleaning InstallationDiscard the Appliance Water connectionTechnical Information Environment ConcernsPackaging Materials Ecological HintsProduct Description AccessoriesControl Panel On OFF ButtonProgramme Knob BCD DisplaySTART/PAUSE Button Delay Start ButtonTime Save Button Extra Rinse ButtonAcoustic Signals Function Temperature ButtonChild Lock Function Permanent Extra Rinse FunctionNo Spin ProgrammesExtra RINSE5 Standard programmes for the Energy Label consumption values Consumption ValuesUsing the Appliance Before First USELoading the Laundry Check the position of the flap Filling the Detergent and AdditivesSetting and Starting a Programme Cancel a ProgrammeInterrupt a Programme Cancel the Delay Start SET the Delay StartAT the END of the Programme Change a FunctionEnglish Laundry Load Hints and TipsStubborn Stains Detergents and AdditivesWater hardness table Level Type Mmol/l Clarke Care and Cleaning Drain Pump Detergent DispenserPage Valve Filter Inlet Hose FilterEmergency Drain Frost PrecautionsTroubleshooting Delay start is set English Unpacking InstallationPull out the plastic spacers Positioning and Levelling Inlet Hose Water Drainage Water-stop deviceEnglish 132930200-A-372011