AEG L 71260 SL, L 71060 SL user manual Positioning and Levelling

Page 32

32

12. Put the plastic caps in the holes. You can find these caps in the user manual bag.

– We recommend that you keep the packaging and the transit bolts for when you move the appliance.

–If the appliance is delivered in the winter months when there are minus temperatures. Store it at room temperature for 24 hours before using for the first time.

POSITIONING AND LEVELLING

x4

• Install the appliance on a flat hard floor.

• Make sure that carpets do not stop the air circulation below the appli- ance.

• Make sure that the appliance does not touch the wall or other units

• Loosen or tighten the feet to adjust the level. A correct adjustment of the appliance level prevents the vibra- tion, noise and the movement of the appliance when in operation.

Image 32

Contents SL L 71260 SL Contents ServiceVisit OUR Website for Accessories and ConsumablesFor Perfect Results Safety Information General SafetyCare and Cleaning InstallationWater connection Discard the ApplianceEnvironment Concerns Technical InformationPackaging Materials Ecological HintsAccessories Product DescriptionProgramme Knob Control PanelOn OFF Button Display BCDDelay Start Button START/PAUSE ButtonTime Save Button Extra Rinse ButtonTemperature Button Acoustic Signals FunctionChild Lock Function Permanent Extra Rinse FunctionProgrammes No SpinExtra RINSE5 Consumption Values Standard programmes for the Energy Label consumption valuesLoading the Laundry Using the ApplianceBefore First USE Filling the Detergent and Additives Check the position of the flapInterrupt a Programme Setting and Starting a ProgrammeCancel a Programme SET the Delay Start Cancel the Delay StartAT the END of the Programme Change a FunctionEnglish Hints and Tips Laundry LoadStubborn Stains Detergents and AdditivesWater hardness table Level Type Mmol/l Clarke Care and Cleaning Detergent Dispenser Drain PumpPage Inlet Hose Filter Valve FilterFrost Precautions Emergency DrainTroubleshooting Delay start is set English Installation UnpackingPull out the plastic spacers Positioning and Levelling Inlet Hose Water-stop device Water DrainageEnglish 132930200-A-372011