AEG L 71060 SL, L 71260 SL user manual Pull out the plastic spacers

Page 31

ENGLISH 31

6.Put one of the polystyrene packag- ing elements on the floor behind the appliance. Carefully put down the appliance with the rear side on it. Make sure not to damage the hoses.

1

2

7.Remove the polystyrene protection from the bottom.

8.Pull up the appliance in vertical po- sition.

9.Remove the power supply cable and the drain hose from the hose holders.

10.Remove the three bolts. Use the key supplied with the appliance.

11.Pull out the plastic spacers.

Image 31

Contents SL L 71260 SL Service ContentsFor Perfect Results Accessories and ConsumablesVisit OUR Website for Installation Safety InformationGeneral Safety Care and CleaningDiscard the Appliance Water connectionEcological Hints Environment ConcernsTechnical Information Packaging MaterialsProduct Description AccessoriesOn OFF Button Control PanelProgramme Knob BCD DisplayExtra Rinse Button Delay Start ButtonSTART/PAUSE Button Time Save ButtonPermanent Extra Rinse Function Temperature ButtonAcoustic Signals Function Child Lock FunctionNo Spin ProgrammesExtra RINSE5 Standard programmes for the Energy Label consumption values Consumption ValuesBefore First USE Using the ApplianceLoading the Laundry Check the position of the flap Filling the Detergent and AdditivesCancel a Programme Setting and Starting a ProgrammeInterrupt a Programme Change a Function SET the Delay StartCancel the Delay Start AT the END of the ProgrammeEnglish Detergents and Additives Hints and TipsLaundry Load Stubborn StainsWater hardness table Level Type Mmol/l Clarke Care and Cleaning Drain Pump Detergent DispenserPage Valve Filter Inlet Hose FilterEmergency Drain Frost PrecautionsTroubleshooting Delay start is set English Unpacking InstallationPull out the plastic spacers Positioning and Levelling Inlet Hose Water Drainage Water-stop deviceEnglish 132930200-A-372011