AEG L 71060 SL Setting and Starting a Programme, Interrupt a Programme, Cancel a Programme

Page 17

ENGLISH 17

5.Measure out the detergent and the fabric conditioner.

6.Carefully close the detergent dis- penser. Make sure that the flap does not cause a blockage when you close the drawer.

3.To use powder detergent, turn the flap up.

4.To use liquid detergent, turn the flap down.

With the flap in the position

DOWN:

Do not use gelatinous or thick liquid detergents.

Do not put more liquid deter- gent than the limit showed in the flap.

Do not set the prewash phase.

Do not set the delay start function.

SETTING AND STARTING A PROGRAMME

1.Turn the programme knob. The re- lated programme indicator comes on.

2.The indicator of button 4 flashes with red colour.

3.The display shows the default tem- perature and spin speed. To change the temperature and/or the spin speed, press the related but- tons.

4.Set the available functions. The in- dicator of the set function comes on or the display shows the related symbol.

5.Press button 4 to start the pro- gramme. The indicator of button 4 is on.

INTERRUPT A PROGRAMME

1.Press button 4 . The indicator flashes.

2.Press button 4 again. The wash- ing programme continues.

CANCEL A PROGRAMME

1.Press button 1 to cancel the pro- gramme and to deactivate the ap- pliance.

2.Press button 1 again to activate the appliance. Now, you can set a new washing programme.

The appliance does not drain the water.

Image 17
Contents SL L 71260 SL Service ContentsVisit OUR Website for Accessories and ConsumablesFor Perfect Results General Safety Safety InformationCare and Cleaning InstallationDiscard the Appliance Water connectionTechnical Information Environment ConcernsPackaging Materials Ecological HintsProduct Description AccessoriesProgramme Knob Control PanelOn OFF Button BCD DisplaySTART/PAUSE Button Delay Start ButtonTime Save Button Extra Rinse ButtonAcoustic Signals Function Temperature ButtonChild Lock Function Permanent Extra Rinse FunctionNo Spin ProgrammesExtra RINSE5 Standard programmes for the Energy Label consumption values Consumption ValuesLoading the Laundry Using the ApplianceBefore First USE Check the position of the flap Filling the Detergent and AdditivesInterrupt a Programme Setting and Starting a ProgrammeCancel a Programme Cancel the Delay Start SET the Delay StartAT the END of the Programme Change a FunctionEnglish Laundry Load Hints and TipsStubborn Stains Detergents and AdditivesWater hardness table Level Type Mmol/l Clarke Care and Cleaning Drain Pump Detergent DispenserPage Valve Filter Inlet Hose FilterEmergency Drain Frost PrecautionsTroubleshooting Delay start is set English Unpacking InstallationPull out the plastic spacers Positioning and Levelling Inlet Hose Water Drainage Water-stop deviceEnglish 132930200-A-372011