AEG 16850 user manual Altering an option or a running programme, Interrupting a programme

Page 19

Use 19

CANCELLING THE DELAYED START:

●set the washer-dryer to PAUSE by pressing the button 7;

●press the button 8 until the symbol 0’ is displayed;

●press the button 7 again to start the programme.

The button 8 cannot be selected with DRAIN programme.

Altering an option or a running programme

It is possible to change any option before the programme carries it out. Before you make any change, you must pause the washer-dryer by pressing the button

7.

Changing a running programme is possible only by resetting it. Turn the programme selector dial to O and then to the new programme position. Start the new programme by pressing the button 7 again. The washing water in the tub will be not emptied out.

Interrupting a programme

Depress the button 7 to interrupt a programme which is running, the corresponding light starts blinking. Press the button again to restart the programme.

Cancelling a programme

Turn the selector dial to O to cancel a programme which is running. Now you can select a new programme.

Opening the door after the programme has started

First set the machine to pause by pressing the button 7.

●if the DOOR symbol disappears, the door can be opened.

●if the DOOR symbol remains lit, it means that the machine is already heating, that the water level is above the bottom edge of the door. In this case the door cannot be opened.

●If you cannot open the door but you need to open it, you have to switch the machine off by turning the selector dial to O. After a few minutes the door can be opened (pay attention to the water level and temperature!).

After closing the door, it is necessary to select the programme and options again and to press button 7.

Image 19

Contents Lavamat L Dear Customer Contents Drying Enviroment concerns Prior to using for the first time Safety informationGeneral safety Use InstallationChild Safety Detergent dispenser drawer Product descriptionControl panel Display Duration of the selected programme Personalization Acoustic signalsChild safety lock First UseLoad the laundry Daily UseMeasure out the detergent and the fabric softener Washing Prewash option Super Quick option Stain optionSensitive option Daily optionPress the START/PAUSE button Select the Delay Start bypressing the buttonOpening the door after the programme has started Cancelling a programmeAltering an option or a running programme Interrupting a programmeAt the end of the programme Select the timed drying by pressing the button Select the automatic drying by pressing the buttonAutomatic washing and drying NON-STOP programme Synthetic or mixed fabrics Washing programmesCold Description Optionsprogramme Programme informationWool Plus Handwash Drying times Automatic drying programmesBefore loading the laundry TemperaturesPreparing the wash cycle Sorting out the laundryMaximum loads Laundry weightsRemoving stains Detergents and additives Degrees of water hardness Quantity of detergent to be usedLaundry not suitable for drying Preparing the drying cycleDrying cycle duration Gargment’s labelsAdditional drying Care and cleaning Door seal Washing drumDrain pump Care and cleaning Back in its seat Screw the pump fully Close the pump door Water inlet filterEmergency emptying out Frost precautionsWhat to do if Possible cause/SolutionMachine fills then empties immediately Cause possible/Solution Technical Data KWh Consumption valueUnpacking InstallationHEC0003 Water inlet Positioning and levellingWater drainage Water-stop deviceOnto a sink outlet spigot Electrical connection Interest of the environmentPermanent connection Ecological hints Enviroment concernsPackaging materials Old machine132 966 761 -01-222008 Subject to change without notice