AEG 16850 user manual HEC0003

Page 45

		Installation	45
4. Unscrew and remove the two large rear bolts B
and the six smaller bolts C.
			C
	C	D	B
HEC0003	C	B
5. Remove the bracket D and tighten up the six
smaller bolts C. Slide out the relevant plastic
spacer E.		E
			C
HEC0023 C

6.Open the porthole, take out the inlet hose from the drum and remove the polystyrene block fitted on the door seal.

7.Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet.

8.Connect the water inlet hose as described under the paragraph «Water inlet».

All the different plug caps are supplied with the appliance in the plastic bag containing the instruction booklet.

HEC0010

HEC0005

Image 45

Contents Lavamat L Dear Customer Contents Drying Enviroment concerns Safety information Prior to using for the first timeGeneral safety Use InstallationChild Safety Detergent dispenser drawer Product descriptionControl panel Display Duration of the selected programme Child safety lock Acoustic signalsFirst Use PersonalizationDaily Use Load the laundryMeasure out the detergent and the fabric softener Washing Prewash option Sensitive option Stain optionDaily option Super Quick optionPress the START/PAUSE button Select the Delay Start bypressing the buttonAltering an option or a running programme Cancelling a programmeInterrupting a programme Opening the door after the programme has startedAt the end of the programme Select the timed drying by pressing the button Select the automatic drying by pressing the buttonAutomatic washing and drying NON-STOP programme Synthetic or mixed fabrics Washing programmesCold Description Optionsprogramme Programme informationWool Plus Handwash Drying times Automatic drying programmesPreparing the wash cycle TemperaturesSorting out the laundry Before loading the laundryLaundry weights Maximum loadsRemoving stains Detergents and additives Degrees of water hardness Quantity of detergent to be usedLaundry not suitable for drying Preparing the drying cycleGargment’s labels Drying cycle durationAdditional drying Care and cleaning Washing drum Door sealDrain pump Care and cleaning Back in its seat Screw the pump fully Close the pump door Water inlet filterEmergency emptying out Frost precautionsWhat to do if Possible cause/SolutionMachine fills then empties immediately Cause possible/Solution Technical Data KWh Consumption valueUnpacking InstallationHEC0003 Water inlet Positioning and levellingWater drainage Water-stop deviceOnto a sink outlet spigot Electrical connection Interest of the environmentPermanent connection Packaging materials Enviroment concernsOld machine Ecological hints132 966 761 -01-222008 Subject to change without notice