AEG 16850 Water inlet filter, Back in its seat Screw the pump fully Close the pump door

Page 37

Care and cleaning 37

7.Remove any objects from the pump

impeller by rotating it.

8.Put the cap back on the emergency emptying hose and place the latter

back in its seat.

9. Screw the pump fully in.

10. Close the pump door.

Warning!

When the appliance is in use and depending on the programme selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is securely retightened so as to stop leaks and young children being able to remove it.

Water inlet filter

If you notice that the machine is taking longer to fill, check that the filter in the water inlet hose is not blocked.

1. Turn off the water tap.

2. Unscrew the hose from the tap.

3. Clean the filter in the hose with a stiff brush.

4. Screw the hose back onto the tap.

Image 37

Contents Lavamat L Dear Customer Contents Drying Enviroment concerns Prior to using for the first time Safety informationGeneral safety Use InstallationChild Safety Detergent dispenser drawer Product descriptionControl panel Display Duration of the selected programme Child safety lock Acoustic signalsFirst Use PersonalizationLoad the laundry Daily UseMeasure out the detergent and the fabric softener Washing Prewash option Sensitive option Stain optionDaily option Super Quick optionPress the START/PAUSE button Select the Delay Start bypressing the buttonAltering an option or a running programme Cancelling a programmeInterrupting a programme Opening the door after the programme has startedAt the end of the programme Select the timed drying by pressing the button Select the automatic drying by pressing the buttonAutomatic washing and drying NON-STOP programme Synthetic or mixed fabrics Washing programmesCold Description Optionsprogramme Programme informationWool Plus Handwash Drying times Automatic drying programmesPreparing the wash cycle TemperaturesSorting out the laundry Before loading the laundryMaximum loads Laundry weightsRemoving stains Detergents and additives Degrees of water hardness Quantity of detergent to be usedLaundry not suitable for drying Preparing the drying cycleDrying cycle duration Gargment’s labelsAdditional drying Care and cleaning Door seal Washing drumDrain pump Care and cleaning Back in its seat Screw the pump fully Close the pump door Water inlet filterEmergency emptying out Frost precautionsWhat to do if Possible cause/SolutionMachine fills then empties immediately Cause possible/Solution Technical Data KWh Consumption valueUnpacking InstallationHEC0003 Water inlet Positioning and levellingWater drainage Water-stop deviceOnto a sink outlet spigot Electrical connection Interest of the environmentPermanent connection Packaging materials Enviroment concernsOld machine Ecological hints132 966 761 -01-222008 Subject to change without notice