AEG 16850 user manual Installation, Unpacking

Page 44

44Installation

Installation

Unpacking

All transit bolts and packing must be removed before using the appliance.

You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.

1.After removing all the packaging, carefully lay machine on it’s back to remove the

polystyrene base from the bottom.

HEC0008

2.Remove the power supply cable and the

draining hose from the hose holders on the rear of the

appliance.

HEC0001

3. With a suitable spanner unscrew and remove the central rear bolt A.

A

HEC00022

Image 44

Contents Lavamat L Dear Customer Contents Drying Enviroment concerns General safety Safety informationPrior to using for the first time Installation UseChild Safety Product description Detergent dispenser drawerControl panel Display Duration of the selected programme Acoustic signals Child safety lockFirst Use PersonalizationMeasure out the detergent and the fabric softener Daily UseLoad the laundry Washing Prewash option Stain option Sensitive optionDaily option Super Quick optionSelect the Delay Start bypressing the button Press the START/PAUSE buttonCancelling a programme Altering an option or a running programmeInterrupting a programme Opening the door after the programme has startedAt the end of the programme Select the automatic drying by pressing the button Select the timed drying by pressing the buttonAutomatic washing and drying NON-STOP programme Washing programmes Synthetic or mixed fabricsCold Programme information Description OptionsprogrammeWool Plus Handwash Automatic drying programmes Drying timesTemperatures Preparing the wash cycleSorting out the laundry Before loading the laundryRemoving stains Laundry weightsMaximum loads Detergents and additives Quantity of detergent to be used Degrees of water hardnessPreparing the drying cycle Laundry not suitable for dryingAdditional drying Gargment’s labelsDrying cycle duration Care and cleaning Drain pump Washing drumDoor seal Care and cleaning Water inlet filter Back in its seat Screw the pump fully Close the pump doorFrost precautions Emergency emptying outPossible cause/Solution What to do ifMachine fills then empties immediately Cause possible/Solution Technical Data Consumption value KWhInstallation UnpackingHEC0003 Positioning and levelling Water inletWater-stop device Water drainageOnto a sink outlet spigot Interest of the environment Electrical connectionPermanent connection Enviroment concerns Packaging materialsOld machine Ecological hints132 966 761 -01-222008 Subject to change without notice