Perreaux SM6 MKII owner manual 13Specifications, 8VRMS

Page 31

13Specifications

Specifications In Brief

The SM6 specifications are detailed in brief and then subsequently in more detail. In the detailed version, we attempt to explain the significance of each specification.

The correlation between published specifications and sonic quality can be unreliable. A list of numbers reveals virtually nothing. All technical measurements must be subject to qualitative as well as quantitative interpretation. Measurements of the SM6 reveal excellent results by any standards. Tested at 115V and 230V after a 10 minute warm up period.

Rated Output

 

Unbalanced:

1.5VRMS

Balanced:

1.5VRMS

Maximum Output

 

Unbalanced:

3.3VRMS

Balanced:

6.8VRMS

Gain Range:

-97dB to +18dB

Gain Resolution:

1.5dB

Total Harmonic Distortion (THD+N)

 

Rated Output:

<0.004%, 20Hz – 20kHz

Frequency Response

 

20Hz – 20kHz:

+0dB, –0.03dB

10Hz – 60kHz:

+0dB, –0.15dB

Signal to Noise ratio (unweighted)

 

Unbalanced:

95dB

Balanced:

100dB

Dynamic Range:

116dB

Channel Separation

 

Unbalanced:

95dB @ 1kHz

.................................................................................................

70dB @ 20kHz

Balanced:

105dB @ 1kHz

.................................................................................................

80dB @ 20kHz

Input Impedance

 

Unbalanced:

10kQ

Balanced:

20kQ

Input Sensitivity

 

Unbalanced:

200mV

Balanced:

200mV

Input Overload

 

Unbalanced:

3.9VRMS

Balanced:

7.8VRMS

Phase Accuracy:

±0.5˚, 20Hz – 20kHz

Power Consumption

 

Standby:

0.5W

Operation:

50W

31

Image 31
Contents Prisma SM6 MkII Page Introducing the Perreaux SM6 MkII Preamplifier Ii Important Safety Instructions Iii Table of ContentsUnpacking and Placement Instant Install Start your source material playing Input a Input B Input C Input D HT Loop Input E Input F Front Panel FunctionsPage Rear Panel Functions Unbalanced Source Inputs Remote Trigger Outputs Plug must follow the specifications as per the diagram below Remote Control Functions Depressing this button increases the volume Scroll Source Up Special Design Philosophies Minimalism in a Wider Context Special Design Features Maximising System Potential Watts is twice as loud as 10 Watts, not ten times as loud Care and Maintenance Obtaining Service Warranty InformationRegistration Form Extended WarrantyFaultfinding Your System Identifying Isolating Problems Loudspeakers Preamplifier Amplifier Faultfinding Flowchart 8VRMS 13SpecificationsAudio Inputs Gain Resolution 5dB Input Sensitivity 200mV Physical Dimensions Contact Details Installation Notes

SM6 MKII specifications

The Perreaux SM6 MKII is an impressive amplifier that encapsulates the essence of high-fidelity audio performance, making it a remarkable choice for discerning audiophiles. Renowned for its robust build quality and sophisticated design, the SM6 MKII promises to deliver an immersive listening experience while showcasing the brand’s commitment to craftsmanship and innovation.

At the heart of the SM6 MKII is a high-power solid-state amplifier circuit that ensures dynamic and accurate sound reproduction. With a power output of 100 watts per channel into 8 ohms, the amplifier can easily drive a wide range of loudspeakers. It is designed to handle the most demanding musical passages without distortion, making it suitable for both loud and nuanced listening environments.

One of the standout features of the SM6 MKII is its dual-mono design, which helps to eliminate crosstalk between the left and right channels. This design philosophy not only enhances stereo imaging but also provides a more immersive soundstage. The amp utilizes a high-performance toroidal transformer, known for its efficiency and minimal electromagnetic interference, further enhancing the clarity of the audio signal.

The SM6 MKII integrates advanced technologies, such as the unique feedback topology that helps minimize distortion and improve signal integrity. This technology ensures that the amplifier remains stable under varying load conditions, providing consistent performance regardless of speaker impedance or volume levels. Additionally, the high-current output stage significantly contributes to its dynamic capabilities, allowing for impressive transient response.

Another characteristic of the SM6 MKII is its user-friendly interface. The amplifier features intuitive knobs and switches that enable easy adjustment of volume, balance, and input selection. The robust chassis construction not only contributes to its aesthetic appeal but also serves to reduce vibration and external interference, ensuring that the audio integrity is preserved.

Overall, the Perreaux SM6 MKII stands out as an excellent investment for those who prioritize audio fidelity and performance. With its powerful output, sophisticated design, and innovative technologies, it is well-equipped to deliver a captivating listening experience that meets the demands of even the most discerning listeners. Whether you're enjoying music in a casual setting or critically listening for nuances, the SM6 MKII provides a sound experience that is both engaging and lifelike.