Perreaux SM6 MKII owner manual Instant Install

Page 7

2

Instant Install

Note:

Note:

Note:

If you are like us, the first thing you will want to do is to play your favourite piece of music through your new SM6. The following instructions are written to enable you to achieve this as quickly as possible. These are not comprehensive instructions, but are designed to enable you to play music now!

Please take the time to read the SM6 manual thoroughly as it incorporates many features, which will enhance its operation.

Placement

The SM6 is a reference preamplifier and best results will be achieved when placed on a solid surface with adequate ventilation. DO NOT place on a carpeted floor or cover the preamplifier!

Turn off associated components

This minimises the potential to damage any other components when connecting your SM6 into the system.

Connect SM6 to power amplifier

Connect the balanced (XLR) or unbalanced (RCA) outputs of your SM6 to the appropriate inputs at the rear of your power amplifier.

Try to keep all interconnect cables as far from loudspeaker cables as possible and well away from all AC mains leads.

Connect source component to SM6

Connect the relevant output of your source component to either the balanced (XLR) or unbalanced (RCA) inputs of your SM6.

Be sure to set the Balanced Input switch to the appropriate position, ON if using the balanced (XLR) inputs and OFF if using the unbalanced (RCA) inputs.

Switch on source component

Turn on the source component and make sure you have some program material ready to play.

Switch on SM6

After checking the supply voltage compatibility with the voltage rating on the SM6 rear panel, insert the power cord-set supplied into the rear of the unit and into the wall. Switch on the socket at the wall and power up the SM6 using the switch on the rear panel.

Switch on power amplifier

Turn on your power amplifier.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Prisma SM6 MkII Page Introducing the Perreaux SM6 MkII Preamplifier Ii Important Safety Instructions Iii Table of ContentsUnpacking and Placement Instant Install Start your source material playing Input a Input B Input C Input D HT Loop Input E Input F Front Panel FunctionsPage Rear Panel Functions Unbalanced Source Inputs Remote Trigger Outputs Plug must follow the specifications as per the diagram below Remote Control Functions Depressing this button increases the volume Scroll Source Up Special Design Philosophies Minimalism in a Wider Context Special Design Features Maximising System Potential Watts is twice as loud as 10 Watts, not ten times as loud Care and Maintenance Obtaining Service Warranty InformationRegistration Form Extended WarrantyFaultfinding Your System Identifying Isolating Problems Loudspeakers Preamplifier Amplifier Faultfinding Flowchart 8VRMS 13SpecificationsAudio Inputs Gain Resolution 5dB Input Sensitivity 200mV Physical Dimensions Contact Details Installation Notes

SM6 MKII specifications

The Perreaux SM6 MKII is an impressive amplifier that encapsulates the essence of high-fidelity audio performance, making it a remarkable choice for discerning audiophiles. Renowned for its robust build quality and sophisticated design, the SM6 MKII promises to deliver an immersive listening experience while showcasing the brand’s commitment to craftsmanship and innovation.

At the heart of the SM6 MKII is a high-power solid-state amplifier circuit that ensures dynamic and accurate sound reproduction. With a power output of 100 watts per channel into 8 ohms, the amplifier can easily drive a wide range of loudspeakers. It is designed to handle the most demanding musical passages without distortion, making it suitable for both loud and nuanced listening environments.

One of the standout features of the SM6 MKII is its dual-mono design, which helps to eliminate crosstalk between the left and right channels. This design philosophy not only enhances stereo imaging but also provides a more immersive soundstage. The amp utilizes a high-performance toroidal transformer, known for its efficiency and minimal electromagnetic interference, further enhancing the clarity of the audio signal.

The SM6 MKII integrates advanced technologies, such as the unique feedback topology that helps minimize distortion and improve signal integrity. This technology ensures that the amplifier remains stable under varying load conditions, providing consistent performance regardless of speaker impedance or volume levels. Additionally, the high-current output stage significantly contributes to its dynamic capabilities, allowing for impressive transient response.

Another characteristic of the SM6 MKII is its user-friendly interface. The amplifier features intuitive knobs and switches that enable easy adjustment of volume, balance, and input selection. The robust chassis construction not only contributes to its aesthetic appeal but also serves to reduce vibration and external interference, ensuring that the audio integrity is preserved.

Overall, the Perreaux SM6 MKII stands out as an excellent investment for those who prioritize audio fidelity and performance. With its powerful output, sophisticated design, and innovative technologies, it is well-equipped to deliver a captivating listening experience that meets the demands of even the most discerning listeners. Whether you're enjoying music in a casual setting or critically listening for nuances, the SM6 MKII provides a sound experience that is both engaging and lifelike.
Top Page Image Contents