Maytag MAF9601 manual During the Programme, Putting in or taking out washing

Page 16

DURING THE PROGRAMME

If you wish to interrupt or change the

programme

Hold down the button for three se- conds. An extinguished LED next to the button indicates that the programme has been inter- rupted.

Add more detergent, if necessary, before se- lecting a new programme.

Putting in or taking out washing

If you wish to put in or take out washing after you have started the machine, you must hold

down the button for three seconds, when the LED next to the button will light. Any wa- ter will be pumped out, and the door can then be opened. Put in more washing, add more de- tergent, if necessary, and close the door. The washing programme will restart automatically from the point at which it was interrupted.

Changing settings after starting

It is possible for you to alter certain settings and options after you have started the washing programme.

Hold down the button for the setting or the option for three seconds. The temperature is shown in the display.

Within 15 seconds of releasing the button, you must index forward to the new desired set- ting.

In order to make an alteration, however, the part of the programme that you wish to alter must not have been activated yet.

-Programme – If the programme selector knob is moved when the programme is running, this

will not affect the programme. You should in- terrupt the programme instead.

-Temperature – can be altered before the main wash has started.

-Spin speed – can be altered before the water is pumped out after the main wash.

-Delayed start – cannot be altered. You should instead interrupt the programme, change the settings and restart the machine.

-Super rinse – can be altered before the water is pumped out after the main wash.

-E2 – can be altered before the start of the main wash.

-The Pre-soak option means that the washing is left to soak for two hours before the pro- gramme starts.

16

Image 16
Contents Maytag Contents Before Washing the First Time Transport SupportsWasher Door Check Hardness of the WaterSafety Instructions GeneralInterrupting a Programme Overfill ProtectionTRANSPORT/ Winter Storage DisposalCHILDREN’S Safety CHILD-SAFE WashingProtect Children Child Lock on ButtonParts of the Washer Detergent CompartmentPanel Option ButtonsBefore Washing Minimizing Allergy Risks PRE-SOAKINGSave Time Economy and EfficiencyDetergents Textile Dyeing1SORT the Washing Washing4PUTTING in the Detergent and CON- Ditioner Pre Table of Available Programmes5SELECT a Programme 7C L O S E T H E D O O R a N D S TA RT T H E During the Programme Putting in or taking out washing9WHEN Washing is Finished 8PROGRAMME CompletedThis page has been left blank for technical printing reasons Programme MATERIAL/WASHING Load Water Consump Power Consump Consumption ValuesCleaning the Detergent Compartment Care and CleaningCleaning the Outside of the Machine Cleaning Holes Under the Ridges Hard WaterTrouble Shooting Machine will not StartDoor will not Close Door will not OpenFault Indications on the Display Display shows Explanation Suggested remedyNormal Indications on the Display Display shows ExplanationProceed as follows to alter the washing Temperature display This page has been left blank for technical printing reasons Technical Information Technical DataStandard Tests This page has been left blank for technical printing reasons Service Service and GuaranteeGuarantee Sort the Washing Press the Main Power Quick GuideDoor and PUT in the Washing With the Button WA S H I N G P R O G R a M M E CompletedIndex