Maytag MAF9601 manual Normal Indications on the Display, Display shows Explanation

Page 24

NORMAL INDICATIONS ON THE DISPLAY

Display shows Explanation

No programme selected.

One or two digits, followed by an h.

Delayed start is selected, and the programme has started. The display shows the number of hours remaining to start of the programme.

One digit, one H followed by two digits or only 1-2 digits, indicates that a programme is running.

The display shows the remaining programme time in hours and minutes.

Displayed when selecting temperature. The tempe- rature can be displayed either in degrees Celsius (C) or Fahrenheit (F).

CC and CF indicate that the machine is set for the temperature of the incoming water.

To change the display, see the section Wash tempera- ture – Celsius or Fahrenheit in this Chapter.

Programme complete. Take out the washing.

Can be displayed when selecting spin speed. Indi- cates No spin/No drain. The programme will then be run without spins and will be completed with the final rinse water still in the machine.

Can be displayed when selecting spin speed. Indi- cates No spin. The programme will then be run wit- hout spins.

Displayed instead of temperature and spin speed where these settings are not relevant. E.g. it is not possible to select a temperature for the Rinse program- me.

24

Image 24

Contents Maytag Contents Before Washing the First Time Transport SupportsWasher Door Check Hardness of the WaterSafety Instructions GeneralInterrupting a Programme Overfill ProtectionTRANSPORT/ Winter Storage DisposalCHILDREN’S Safety CHILD-SAFE WashingProtect Children Child Lock on ButtonParts of the Washer Detergent CompartmentPanel Option ButtonsBefore Washing Minimizing Allergy Risks PRE-SOAKINGSave Time Economy and EfficiencyDetergents Textile DyeingWashing 1SORT the Washing4PUTTING in the Detergent and CON- Ditioner Pre Table of Available Programmes5SELECT a Programme 7C L O S E T H E D O O R a N D S TA RT T H E During the Programme Putting in or taking out washing9WHEN Washing is Finished 8PROGRAMME CompletedThis page has been left blank for technical printing reasons Programme MATERIAL/WASHING Load Water Consump Power Consump Consumption ValuesCare and Cleaning Cleaning the Detergent CompartmentCleaning the Outside of the Machine Cleaning Holes Under the Ridges Hard WaterTrouble Shooting Machine will not StartDoor will not Close Door will not OpenFault Indications on the Display Display shows Explanation Suggested remedyNormal Indications on the Display Display shows ExplanationProceed as follows to alter the washing Temperature display This page has been left blank for technical printing reasons Technical Data Technical InformationStandard Tests This page has been left blank for technical printing reasons Service and Guarantee ServiceGuarantee Sort the Washing Press the Main Power Quick GuideDoor and PUT in the Washing With the Button WA S H I N G P R O G R a M M E CompletedIndex