Maytag MAF9601 manual Technical Information, Technical Data, Standard Tests

Page 27

13 TECHNICAL INFORMATION

TECHNICAL DATA
Height:	850 mm.
Width:	595 mm.
Depth:	585 mm.
Weight:	73 kg/78 kg (with outer door).
Drum volume:	50 litre.
Max. washing capacity	6.0 kg.
Spin speed, r/min:	400 - 1600 rpm.
Rated power, connection:	See data plate.
Rated power, element:	See data plate.
Water pressure:	0.1 - 1 MPa.
	1 - 10 kp/cm2.
	10 - 100 N/cm2.
Material: Washing drum and fluid container	Stainless steel.
Material: Outer cover	Powder-lacquered and hot-galvanized steel
	sheet or stainless steel.
Positioning:	Stationary on four adjustable, rubber-coated feet.
Water connection:	1.5 m PEX tube.
Drain:	1.7 polypropylene hose.
STANDARD TESTS
Europe:	EN 60 456 Ed. 4
Washing programme:	Programme 2 - White Cotton, 60ºC,
	6.0 kg cotton.
Connection:	Cold water 15ºC.
Test procedure, acoustic measurement:	IEC 60 704-2-4.

27

Image 27

Contents Maytag Contents Check Hardness of the Water Before Washing the First TimeTransport Supports Washer DoorOverfill Protection Safety InstructionsGeneral Interrupting a ProgrammeDisposal TRANSPORT/ Winter StorageChild Lock on Button CHILDREN’S SafetyCHILD-SAFE Washing Protect ChildrenDetergent Compartment Parts of the WasherOption Buttons PanelBefore Washing Economy and Efficiency Minimizing Allergy RisksPRE-SOAKING Save TimeTextile Dyeing DetergentsWashing 1SORT the Washing4PUTTING in the Detergent and CON- Ditioner Table of Available Programmes Pre5SELECT a Programme 7C L O S E T H E D O O R a N D S TA RT T H E Putting in or taking out washing During the Programme8PROGRAMME Completed 9WHEN Washing is FinishedThis page has been left blank for technical printing reasons Consumption Values Programme MATERIAL/WASHING Load Water Consump Power ConsumpCare and Cleaning Cleaning the Detergent CompartmentCleaning the Outside of the Machine Hard Water Cleaning Holes Under the RidgesDoor will not Open Trouble ShootingMachine will not Start Door will not CloseDisplay shows Explanation Suggested remedy Fault Indications on the DisplayDisplay shows Explanation Normal Indications on the DisplayProceed as follows to alter the washing Temperature display This page has been left blank for technical printing reasons Technical Data Technical InformationStandard Tests This page has been left blank for technical printing reasons Service and Guarantee ServiceGuarantee With the Button WA S H I N G P R O G R a M M E Completed Sort the Washing Press the Main PowerQuick Guide Door and PUT in the WashingIndex