5SELECT a Programme

Select the programme that you wish to use with the programme selector knob.

See the table of programmes for more infor- mation about the various available program- mes.

6SELECTING SETTINGS AND OPTIONS You can obtain a washing programme to suit your particular wash by changing the

settings and options.

The machine will remember the settings and options that you make for each programme and will start with these (with a few exceptions – temperatures above 60°C and Delayed start) the next time you select the programme con- cerned. Of course, you can then make a further change if you wish.

Temperature

Set the temperature by indexing forward with

the button. The selected temperature is indicated in the display as you index forward.

You can select temperatures between 30°C

and 95°C or ( if set for Fahrenheit).

denotes that the wash temperature will be the same as that of the incoming water.

For certain programmes, it is not possible to select a temperature higher than 40°C; see the table.

Spin speed/No Spin/No Drain

Select the spin speed by indexing forward with

the button. The selected speed is indica- ted in the display as you index forward.

You can select speeds from 400-1600 revolu-

tions/minute, No Spin ( ) or No Spin/No

Drain ( ).

For certain programmes, it is not possible to select a spin speed higher than 800 revolutions/ minute; see the table.

Spinning at 400-800 revolutions/minute al- ways means a short spin. Spinning at 1000 re- volutions/minute or higher always means a long

spin.
No Spin (	) means that the programme

will be executed without spins and will end with

draining.
No Spin/No Drain (	) means that

the programme will be executed without spins and will end with the final rinsing water re- maining in the machine. The wash will then remain floating in the final rinsing water and will not become creased. Once the programme is complete, you can then select one or other of the Spin or Drain programmes or press the door opening button to empty the rinsing water from the machine.

Delayed start

Set the number of hours by which the start will be delayed by indexing forward with the button. The selected time is indicated in the display as you index forward.

A delay of 5 hours thus means that the mach- ine will start the programme 5 hours after pres- sing the start button.

You can select a delay of between 1 and 24 hours.

denotes that the option is disconnected and that the programme will start immediately as usual.