Zanussi FL 1014 V1 Select the programme and start it, At the end of the programme

Page 16

6. Select the programme and start it

Turn the programme selector dial clockwise to the required wash programme and press the start/stop button : the operating pilot light comes on and the machine starts to operate.

7. At the end of the programme

The machine stops automatically, the operating pilot light goes out.

If you have selected a gentle programme with the anticrease option , drain the water before opening the door.

It is normal to have to wait for about 2 minutes before being able to open the door to allow the safety lock to release.

Press the start/stop button again.

Remove the laundry.

Turn the drum by hand to make sure it is completely empty, so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites.

Release any buttons which have been pressed.

Turn the water tap off and unplug the machine.

Leave the door ajar to air the machine.

P0218

P0412

ENGLISH

35

Image 16
Contents Lavadora Washing Machine Ecological hints Your NEW Washing MachineProtection of the environment Contents Installation Service/repairSafety Important InformationDescription of the Appliance Technical SpecificationsDetergent dispenser drawer Unpacking InstallationPositioning Water drainage Water inletElectrical connection Door reversal Fitting a door panelUSE Washing hints Detergents and additives Quantity of detergent to be usedWash code symbols Energetic wash Delicate washEnergetic programmes for cotton and linen 60-9040-60 Operating sequence Place the laundry in the drumMeasure out the detergent Measure out the additivesSelect the programme and start it At the end of the programmeBodywork MaintenanceWater inlet filter Drain filter Problem Possible cause Something not WorkingMachine vibrates or is noisy Door will not open