B. FOR THE INSTALLER
1. WARNINGS
•This washing machine is heavy. Take care when moving it.
•You must remove the packing on the washing machine before use. Failure to remove all transport protection devices can cause damage to the washing machine or nearby furniture. The washing machine must be unplugged while packing is being removed.
•Do not allow any one other than a qualified plumber to make the hydraulic connections necessary to install your washing machine.
•The washing machine must be plugged in to a power outlet with a conform earth.
•Call a qualified electrician if the electrical installa- tion in your residence is such that you have to modify it before you can connect your washing machine.
•Please read the instructions in the "electrical con- nections" chapter carefully before connecting your washing machine.
•After installing your washing machine, make sure that it is not standing on its electrical power supply cable.
•When your machine is installed on a carpeted floor, make sure that the carpet does not close off the ventilation openings near the bottom of the machine.
•The power supply cable may be only replaced by the After Sales Service.
•Your manufacturer cannot be held responsible for any damage resulting from a nonconform installa- tion.
2. TECHNICAL CHARACTERISTICS
DIMENSIONS | Height | 850 mm |
| Width | 397 mm |
| Depth | 600 mm |
|
|
|
VOLTAGE / FREQUENCY |
| 230 V / 50 Hz |
TOTAL POWER |
| 2300 W |
|
|
|
WATER PRESSURE | Minimum | 0,05 MPa (0,5 bar) |
| Maximum | 0,8 MPa (8 bars) |
Connection to the water network |
| Type 20x27 |
|
|
|
This washing machine complies with CEE directive
13