Texas Instruments TCM4300 manual Recommended Operating Conditions, Power Consumption

2.3Recommended Operating Conditions

		MIN	NOM	MAX	UNIT
Supply voltage, DVDD		3		5.5	V
High-level input voltage, VIH	Digital	0.7 DVDD		DVDD+0.3	V
Low-level input voltage, VIL	Digital	0		0.3 DVDD	V
High-level output voltage, VOH	Digital	0.7 DVDD		DVDD	V
Low-level output voltage, VOL	Digital	0		0.5	V
High-level output current at 3 V, IOH	Digital	2			mA
Low-level output current at 3 V, IOL	Digital	2			mA
High-level output current at 5 V, IOH	Digital	2			mA
Low-level output current at 5 V, IOL	Digital	2			mA
Load capacitance, transmit I and Q channel outputs			50		pF
VCM input voltage range, transmit I and Q channel outputs		1.3		AVDD±1.3	V
Load resistance, auxiliary DACs			10		kΩ
Load capacitance, auxiliary DACs			50		pF
Operating free-air temperature, TA		± 40		85	°C

2.4Electrical Characteristics Over Full Range Of Operating Conditions (Unless Otherwise Noted)

2.4.1 Power Consumption

PARAMETER		TEST CONDITIONS		MIN TYP²	MAX	UNIT
Analog transmitting and receiving		DVDD = 3 V,	AVDD = 3 V	65	75	mW
		DVDD = 5.5 V,	AVDD = 5.5 V	250	275
Digital receiving		DVDD = 3 V,	AVDD = 3 V	55	60	mW
		DVDD = 5.5 V,	AVDD = 5.5 V	225	250
Digital transmitting		DVDD = 3 V,	AVDD = 3 V	55	70	mW
		DVDD = 5.5 V,	AVDD = 5.5 V	210	250
	MCLKOUT enabled	DVDD = 3 V,	AVDD = 3 V	33	40
Idle mode	MCLKOUT disabled	DVDD = 3 V,	AVDD = 3 V	14	17	mW
	MCLKOUT enabled	DVDD = 5.5 V,	AVDD = 5.5 V	150	160
	MCLKOUT disabled	DVDD = 5.5 V,	AVDD = 5.5 V	80	90
Digital mode, 1/3 transmitting +1/3 receiving		DVDD = 3 V,	AVDD = 3 V	50	60	mW
+ 1/3 standby		DVDD = 5.5 V,	AVDD = 5.5 V	205	220

² All typical values are at TA = 25°C.

2.4.2Reference Characteristics

	PARAMETER	TEST CONDITIONS			MIN	TYP³	MAX	UNIT
VOH(VHR)	High-level output voltage				0.5 AVDD± 0.2		0.5 AVDD+0.2	V
		FMVOX or IQRXEN				80	100	Ω
		or TXEN = high
rO	Output resistance
		FMVOX or IQRXEN			15	40		kΩ
		or TXEN = low
³ All typical values are at DV = 5 V, AV		DD	= 5 V, and T = 25°C
	DD			A

2±2