Zanussi 192994960-00-202009 user manual Special conditions, Interest of the environment

Page 20

Firstly form a hook in the end of the drain hose using the “U” piece” supplied.

“U” piece supplied

2. Onto a sink outlet spigot.

Loop

Place the drain hose into your standpipe, which should have an internal diameter of approximately 38 mm thus ensuring there is an air break between the drain hose and standpipe.

When discharging into a standpipe ensure that the top of the standpipe is no more than 90 cm (35.4'') and no

If the outlet spigot has not been used before, remove any blanking plug that may be in place.

Push the drain hose onto the spigot and secure with a clip, ensure a loop is formed in the drain hose (see above) to prevent waste from the sink enter- ing the appliance.

less than 60 cm (23.6'') above floor level.

38 mm (1.5”)

standpipe

diamater

30 cm (12”)

The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Force Centre. The joining piece must have an internal diameter of 18 mm.

Min. 60 cm (23.6”) Max. 90 cm (35.4”)

If your drain hose looks like this (see beside) you do not require the “U” piece”. Just push the hose firmly in to the standpipe.

If you intend to drain the hose from the machine into a sink, make sure that the sink is empty and the plug hole is not blocked. Use the plastic “U - Piece” supplied.

Special conditions

If the floor is carpeted or covered with crumbly or soft material, insert a rigid support base under the feet to pre- vent noise, vibration or displacement. The base should protrude a few centimetres beyond the edges of the ap- pliance.

Warning! The appliance should NOT be placed on deep pile carpeting.

Note!

Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown.

In the interest of the environment

The appliance should be connected to the FOUL drainage system, the water will then be taken to a sewage works for treatment before being discharged safely into a river.

It is essential that these appliances are not connected to the surface water drainage system as this water is dis- charged directly into a river or stream and may cause pollution.

If you require any further advice please contact your local water authority.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Washing Machine ZWF 14069W Contents Safety informationChild safety UseProduct description Control panelDetergent dispenser drawer Compartment for liquid additives fabric softener, starchTable of symbols First use Daily useSelect the Delay Start by pressing button Select the available options by pressing buttons 3Start the programme by pressing button Programmes»Helpful hints and tips Degrees of water hardness Detergents and additivesQuantity of detergent to be used Washing Programmes Main wash RinsesRinses Maximum spin speed at 1400 rpm Max. load 5,5 kg Drain Maximum spin speed at 1400 rpm Max. load 5,5 kgWhat to do if… Drain Maximum spin speed at 700 rpm Max. load 3 kgProblem Replace it with a new one Technical data Consumption valuesCare and cleaning Cleaning the water inlet filters Proceed as follows Disconnect the applianceInstallation Frost precautionEmergency emptying out UnpackingPositioning Water inletWater drainage Out any debris that may have collectedLess than 60 cm 23.6 above floor level Special conditionsInterest of the environment Brown Cord clamp Blue Environment concernsElectrical connection Machine works more economically if it is fully loaded Packaging materialsEcological hints Page 192994960 00

192994960-00-202009 specifications

Zanussi 192994960-00-202009 is a cutting-edge kitchen appliance designed to enhance the modern cooking experience. This versatile built-in oven combines efficiency with powerful cooking capabilities, making it an ideal choice for both novice cooks and seasoned chefs.

One of the standout features of the Zanussi 192994960-00-202009 is its multifunctional cooking modes. It offers a variety of settings, including conventional heating, fan-assisted cooking, grilling, and defrosting, which allows users to prepare a wide array of dishes with precision and ease. The fan-assisted cooking mode ensures an even distribution of heat, enabling perfect results for baked goods, roasts, and casseroles.

This oven also incorporates advanced technology for improved energy efficiency. With an A+ energy rating, the Zanussi model helps reduce energy consumption without compromising on performance. This is increasingly important as consumers become more environmentally conscious and seek appliances that help lower their carbon footprint.

The intuitive control panel is another key characteristic of the Zanussi 192994960-00-202009. Equipped with easy-to-use push buttons and a digital display, it simplifies the cooking process. Users can effortlessly select their desired cooking mode, adjust temperatures, and set timers, allowing for a seamless cooking experience.

Safety is paramount in kitchen appliances, and Zanussi recognizes this with features like the automatic shut-off function. This innovative safety feature ensures that the oven turns off after a set period, providing peace of mind for busy home cooks. Additionally, the oven comes with cool-touch doors, minimizing the risk of burns when opening the appliance during cooking.

Cleaning the Zanussi 192994960-00-202009 is hassle-free, thanks to the interior’s enamel finish, which prevents food residues from sticking to surfaces. This self-cleaning capability allows users to spend less time on maintenance and more time enjoying their culinary creations.

In summary, the Zanussi 192994960-00-202009 is a well-designed built-in oven that stands out for its multifunctionality, energy efficiency, and user-friendly features. Whether you are baking, roasting, or grilling, this oven promises to deliver consistent and high-quality results for all your cooking needs.
Top Page Image Contents