Zanussi 192994960-00-202009 user manual Helpful hints and tips

Page 8

Altering an option or a running programme

It is possible to change some options before the pro- gramme carries them out.

Before you make any change, you must PAUSE the ap- pliance by pressing the button 5 .

Changing a running programme is possible only by re- setting it. Turn the programme selector dial to Off and then to the new programme position. Start the new programme by pressing the button 5 again. The washing water in the tub will be not emptied out.

Interrupting a programme

Press the button 5 to interrupt a programme which is running, the corresponding green pilot light starts blink- ing.

Press the button again to restart the programme.

Cancelling a programme

Turn the selector dial to Off position to cancel a pro- gramme which is running. Now you can select a new pro- gramme.

Opening the door

After the programme has started the door is locked. If, for any reason, you need to open it, set firstly the machine to PAUSE by pressing the button 5 . After a few minutes the pilot light 7.2 goes off and the door can be opened.

If the door remains locked, this means that the machine is already heating or that the water level is too high. In any case, do not try to force the door!

If you cannot open the door but you need to open it you have to switch the machine off by turning the selector dial to Off position. After a few minutes the door can be opened (pay attention to the water level and temperature!) .

After closing the door, it is necessary to select the pro- gramme and options again and to press button 5 .

At the end of the programme

The machine stops automatically. The pilot light of button 5 goes off and after a few minutes the 7.2 pilot light goes off. The light 7.3 illuminates. The door can be opened.

If a programme or an option that ends with water left in the tub has been selected, the light 7.2 illuminates and the door remains locked to indicate that the water must be emptied out before opening the door.

Follow the below instructions to empty out the water:

1.Turn the programme selector dial to Off .

2.Select the draining or spinning programme.

3.Reduce the spin speed if needed, by pressing the relevant button.

4.Press button 5 .

At the end of the programme, the door can be now opened. Turn the programme selector dial to Off to switch the ma- chine off.

Remove the laundry from the drum and carefully check that the drum is empty. If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.

Helpful hints and tips

Sorting out the laundry

Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, wool- lens.

Before loading the laundry

Never wash whites and coloureds together. Whites may lose their «whiteness» in the wash.

New coloured items may run in the first wash; they should therefore be washed separately the first time.

Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or long tapes.

Remove persistent stains before washing.

Rub particularly soiled areas with a special detergent or detergent paste.

Treat curtains with special care. Remove hooks or tie them up in a bag or net.

Removing stains

Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to washing.

Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water.

Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat several times.

Dried grease stains: moisten with turpentine, lay the gar- ment on a soft surface and dab the stain with the fingertips and a cotton cloth.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Washing Machine ZWF 14069W Contents Safety informationChild safety UseProduct description Control panelDetergent dispenser drawer Compartment for liquid additives fabric softener, starchTable of symbols First use Daily useSelect the Delay Start by pressing button Select the available options by pressing buttons 3Start the programme by pressing button Programmes»Helpful hints and tips Degrees of water hardness Detergents and additivesQuantity of detergent to be used Washing Programmes Main wash RinsesRinses Maximum spin speed at 1400 rpm Max. load 5,5 kg Drain Maximum spin speed at 1400 rpm Max. load 5,5 kgWhat to do if… Drain Maximum spin speed at 700 rpm Max. load 3 kgProblem Replace it with a new one Technical data Consumption valuesCare and cleaning Cleaning the water inlet filters Proceed as follows Disconnect the applianceInstallation Frost precautionEmergency emptying out UnpackingPositioning Water inletWater drainage Out any debris that may have collectedLess than 60 cm 23.6 above floor level Special conditionsInterest of the environment Brown Cord clamp Blue Environment concernsElectrical connection Machine works more economically if it is fully loaded Packaging materialsEcological hints Page 192994960 00

192994960-00-202009 specifications

Zanussi 192994960-00-202009 is a cutting-edge kitchen appliance designed to enhance the modern cooking experience. This versatile built-in oven combines efficiency with powerful cooking capabilities, making it an ideal choice for both novice cooks and seasoned chefs.

One of the standout features of the Zanussi 192994960-00-202009 is its multifunctional cooking modes. It offers a variety of settings, including conventional heating, fan-assisted cooking, grilling, and defrosting, which allows users to prepare a wide array of dishes with precision and ease. The fan-assisted cooking mode ensures an even distribution of heat, enabling perfect results for baked goods, roasts, and casseroles.

This oven also incorporates advanced technology for improved energy efficiency. With an A+ energy rating, the Zanussi model helps reduce energy consumption without compromising on performance. This is increasingly important as consumers become more environmentally conscious and seek appliances that help lower their carbon footprint.

The intuitive control panel is another key characteristic of the Zanussi 192994960-00-202009. Equipped with easy-to-use push buttons and a digital display, it simplifies the cooking process. Users can effortlessly select their desired cooking mode, adjust temperatures, and set timers, allowing for a seamless cooking experience.

Safety is paramount in kitchen appliances, and Zanussi recognizes this with features like the automatic shut-off function. This innovative safety feature ensures that the oven turns off after a set period, providing peace of mind for busy home cooks. Additionally, the oven comes with cool-touch doors, minimizing the risk of burns when opening the appliance during cooking.

Cleaning the Zanussi 192994960-00-202009 is hassle-free, thanks to the interior’s enamel finish, which prevents food residues from sticking to surfaces. This self-cleaning capability allows users to spend less time on maintenance and more time enjoying their culinary creations.

In summary, the Zanussi 192994960-00-202009 is a well-designed built-in oven that stands out for its multifunctionality, energy efficiency, and user-friendly features. Whether you are baking, roasting, or grilling, this oven promises to deliver consistent and high-quality results for all your cooking needs.
Top Page Image Contents