Zanussi 192994960-00-202009 Installation, Frost precaution, Emergency emptying out, Unpacking

Page 18

Screw the hose back to the machine and make sure the connection is tight.

Turn on the water tap.

Frost precaution

If the machine is exposed to temperatures below 0°C, certain precautions should be taken.

Turn off the water tap.

Unscrew the inlet hose.

Place the end of the emergency emptying hose and that of the inlet hose in a bowl placed on the floor and let water drain out.

Screw the water inlet hose back on and reposition the emergency emptying hose after having put the cap on again.

When you intend to start the machine up again, make sure that the room temperature is above 0°C.

Emergency emptying out

If the water is not discharged, proceed as follows to empty out the machine:

pull out the plug from the power socket;

close the water tap;

if necessary, wait until the water has cooled down;

open the pump door;

place a bowl on the floor and place the end of the emergency emptying hose into the bowl. Remove its cap. The water should drain by gravity into the bowl. When the bowl is full, put the cap back on the hose. Empty the bowl. Repeat the procedure until water stops flowing out;

clean the pump if necessary as previously described;

replace the emergency emptying hose in its seat after having plugged it;

screw the pump cover again and close the door.

Important! Every time you drain the water through the emergency emptying hose you must pour 2 litres of water into the main wash compartment of the detergent drawer and then run the drain programme. This will activate the ECO Valve device avoiding that part of the detergent remains unused at next washing.

Installation

Unpacking

All transit bolts and packing must be removed before us- ing the appliance.

You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.

After removing all the

Remove the power supply

packaging, carefully lay

cable and the hoses from

machine on it's back to re-

the hose holders on the

move the polystyrene base

rear of the appliance.

from the bottom.

 

Unscrew the three bolts.

Slide out the relevant plas-

 

tic spacers.

18

Image 18
Contents Washing Machine ZWF 14069W Contents Safety informationChild safety UseDetergent dispenser drawer Product descriptionControl panel Compartment for liquid additives fabric softener, starchTable of symbols First use Daily useStart the programme by pressing button Select the Delay Start by pressing buttonSelect the available options by pressing buttons 3 Programmes»Helpful hints and tips Detergents and additives Quantity of detergent to be usedDegrees of water hardness Washing Programmes Main wash RinsesRinses Maximum spin speed at 1400 rpm Max. load 5,5 kg Drain Maximum spin speed at 1400 rpm Max. load 5,5 kgWhat to do if… Drain Maximum spin speed at 700 rpm Max. load 3 kgProblem Replace it with a new one Technical data Consumption valuesCare and cleaning Cleaning the water inlet filters Proceed as follows Disconnect the applianceEmergency emptying out InstallationFrost precaution UnpackingWater drainage PositioningWater inlet Out any debris that may have collectedSpecial conditions Interest of the environmentLess than 60 cm 23.6 above floor level Environment concerns Electrical connectionBrown Cord clamp Blue Packaging materials Ecological hintsMachine works more economically if it is fully loaded Page 192994960 00

192994960-00-202009 specifications

Zanussi 192994960-00-202009 is a cutting-edge kitchen appliance designed to enhance the modern cooking experience. This versatile built-in oven combines efficiency with powerful cooking capabilities, making it an ideal choice for both novice cooks and seasoned chefs.

One of the standout features of the Zanussi 192994960-00-202009 is its multifunctional cooking modes. It offers a variety of settings, including conventional heating, fan-assisted cooking, grilling, and defrosting, which allows users to prepare a wide array of dishes with precision and ease. The fan-assisted cooking mode ensures an even distribution of heat, enabling perfect results for baked goods, roasts, and casseroles.

This oven also incorporates advanced technology for improved energy efficiency. With an A+ energy rating, the Zanussi model helps reduce energy consumption without compromising on performance. This is increasingly important as consumers become more environmentally conscious and seek appliances that help lower their carbon footprint.

The intuitive control panel is another key characteristic of the Zanussi 192994960-00-202009. Equipped with easy-to-use push buttons and a digital display, it simplifies the cooking process. Users can effortlessly select their desired cooking mode, adjust temperatures, and set timers, allowing for a seamless cooking experience.

Safety is paramount in kitchen appliances, and Zanussi recognizes this with features like the automatic shut-off function. This innovative safety feature ensures that the oven turns off after a set period, providing peace of mind for busy home cooks. Additionally, the oven comes with cool-touch doors, minimizing the risk of burns when opening the appliance during cooking.

Cleaning the Zanussi 192994960-00-202009 is hassle-free, thanks to the interior’s enamel finish, which prevents food residues from sticking to surfaces. This self-cleaning capability allows users to spend less time on maintenance and more time enjoying their culinary creations.

In summary, the Zanussi 192994960-00-202009 is a well-designed built-in oven that stands out for its multifunctionality, energy efficiency, and user-friendly features. Whether you are baking, roasting, or grilling, this oven promises to deliver consistent and high-quality results for all your cooking needs.