Zanussi 192994960-00-202009 Select the available options by pressing buttons 3, Programmes»

Page 7

Pull out the dispenser drawer until it stops. Measure out the amount of detergent required, pour it into the

main wash compartmentor in the appropriate com- partment if the selected programme/option it requires (see more details in "Detergent dispenser drawer").

If required, pour fabric softener into the compartment marked (the amount used must not exceed the «MAX» mark in the drawer). Close the drawer gently.

Select the required programme by turning the programme selector dial (1)

Turn the programme selector dial to the required pro- gramme. The green pilot light of the button 5 starts to flash.

The selector dial can be turned either clockwise or coun- terclockwise. Turn to position « Off » to reset programme/ switch the machine off.

At the end of the programme the selector dial must be turned to position «Off» , to switch the machine off.

Caution! If you turn the programme selector dial to another programme when the machine is working, the red pilot light of button 5 will blink 3 times to indicate

a wrong selection. The machine will not perform the new selected programme.

Select the spin speed, the Night Cycle or the Rinse Hold option by pressing button 2

The washing machine will automatically select the max- imum spin value provided for the programme you have chosen. (See "Washing programmes" for the maximum allowed spin speed).

Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a different speed. The relevant light will light up.

Select the available options by pressing buttons 3 and 4

Depending on the programme, different functions can be combined. These must be selected after choosing the de- sired programme and before starting the programme.

When these buttons are pressed, the corresponding pilot lights illuminate. When they are pressed again, the pilot lights go out. If an incorrect option is selected, the inte- grated red pilot light of the button 5 flashes for 3 times.

For the compatibility among the washing pro- grammes and the options see chapter «Washing

Programmes».

Select the Delay Start by pressing button 6

Before you start the programme, if you wish to delay the start, press the button 6 repeatedly, to select the desired delay. The relevant light illuminates.

You must select this option after you have set the pro- gramme and before you start the programme.

You can cancel or modify the delay time at any moment, before you press button 5 .

Selecting the delayed start:

1.Select the programme and the required options.

2.Select the delay start by pressing the button 6 .

3.Press button 5 :

–the machine starts its hourly countdown.

–The programme will start after the selected delay has expired.

Cancelling the delayed start after having started the pro- gramme:

1.Set the washing machine to PAUSE by pressing but- ton 5 .

2.Press button 6 once, the light relevant to the selected delay goes off

3.Press button 5 again to start the programme.

The Delay Start can not be selected with DRAIN pro- gramme.

Important! The selected delay can be changed only after selecting the washing programme again.

The door will be locked throughout the delay time. If you need to open the door, you must set the machine to PAUSE (by pressing the button 5 ) and then wait a few minutes. After you have closed the door, press the button 5 again.

Start the programme by pressing button 5

To start the selected programme, press the button 5 , the corresponding green pilot light stops blinking. The pilot light corresponding to the running phase illuminates. The appliance starts operating and the door is locked.

To interrupt a programme which is running, press the button 5 : the corresponding green pilot light starts blink- ing.

To restart the programme from the point at which it was interrupted, press the button 5 again . If you have chosen a delayed start, the machine will begin the countdown.

If an incorrect option is selected, the red pilot light of the button 5 blinks 3 times.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Washing Machine ZWF 14069W Safety information ContentsUse Child safetyCompartment for liquid additives fabric softener, starch Product descriptionControl panel Detergent dispenser drawerTable of symbols Daily use First useProgrammes» Select the Delay Start by pressing buttonSelect the available options by pressing buttons 3 Start the programme by pressing buttonHelpful hints and tips Quantity of detergent to be used Detergents and additivesDegrees of water hardness Main wash Rinses Washing ProgrammesDrain Maximum spin speed at 1400 rpm Max. load 5,5 kg Rinses Maximum spin speed at 1400 rpm Max. load 5,5 kgDrain Maximum spin speed at 700 rpm Max. load 3 kg What to do if…Problem Replace it with a new one Consumption values Technical dataCare and cleaning Proceed as follows Disconnect the appliance Cleaning the water inlet filtersUnpacking InstallationFrost precaution Emergency emptying outOut any debris that may have collected PositioningWater inlet Water drainageInterest of the environment Special conditionsLess than 60 cm 23.6 above floor level Electrical connection Environment concernsBrown Cord clamp Blue Ecological hints Packaging materialsMachine works more economically if it is fully loaded Page 192994960 00

192994960-00-202009 specifications

Zanussi 192994960-00-202009 is a cutting-edge kitchen appliance designed to enhance the modern cooking experience. This versatile built-in oven combines efficiency with powerful cooking capabilities, making it an ideal choice for both novice cooks and seasoned chefs.

One of the standout features of the Zanussi 192994960-00-202009 is its multifunctional cooking modes. It offers a variety of settings, including conventional heating, fan-assisted cooking, grilling, and defrosting, which allows users to prepare a wide array of dishes with precision and ease. The fan-assisted cooking mode ensures an even distribution of heat, enabling perfect results for baked goods, roasts, and casseroles.

This oven also incorporates advanced technology for improved energy efficiency. With an A+ energy rating, the Zanussi model helps reduce energy consumption without compromising on performance. This is increasingly important as consumers become more environmentally conscious and seek appliances that help lower their carbon footprint.

The intuitive control panel is another key characteristic of the Zanussi 192994960-00-202009. Equipped with easy-to-use push buttons and a digital display, it simplifies the cooking process. Users can effortlessly select their desired cooking mode, adjust temperatures, and set timers, allowing for a seamless cooking experience.

Safety is paramount in kitchen appliances, and Zanussi recognizes this with features like the automatic shut-off function. This innovative safety feature ensures that the oven turns off after a set period, providing peace of mind for busy home cooks. Additionally, the oven comes with cool-touch doors, minimizing the risk of burns when opening the appliance during cooking.

Cleaning the Zanussi 192994960-00-202009 is hassle-free, thanks to the interior’s enamel finish, which prevents food residues from sticking to surfaces. This self-cleaning capability allows users to spend less time on maintenance and more time enjoying their culinary creations.

In summary, the Zanussi 192994960-00-202009 is a well-designed built-in oven that stands out for its multifunctionality, energy efficiency, and user-friendly features. Whether you are baking, roasting, or grilling, this oven promises to deliver consistent and high-quality results for all your cooking needs.
Top Page Image Contents