User & SET-UP Instructions

Payment System Set-up

PD Model Washer is coin payment ready and allows the connection of two different sizes of coins. Inside the drum are two coin-sensor harnesses. To set-up the washer for coin payment, acquire a coin drop mechanism. Connect the white and black coin sensors to the coin slot 1 and 2, respectively.

Installing Pad Strips

NOTE: For PD Models only.

1.Take the 2 foam pad strips from bag.

2.Remove the tape from the back of the adhesive pads.

3.Install the pads on the left and right inside walls of the coin vault, leaving about 6 mm (1/4") to 13 mm (1/2") of space near the front edge of the vault to allow room for the coin box to lock into position.

A. Foam pad strips

Complete Installation

1.Check the electrical requirements. Be sure that you have the correct electrical supply and the recommended earthing method. See “Electrical Requirements.”

2.Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

3.Check that you have all of your tools.

4.Dispose of/recycle all packaging materials.

5.Check that the water taps are on.

6.Check for leaks around taps and inlet hoses.

7.Plug into an earthed socket outlet.

8.To test and to clean your washer, measure 1/2 the detergent manufacturer’s recommended amount for a medium-size load. Pour the detergent into the detergent dispenser. Select any cycle and allow the washer to complete one whole cycle.

1.Door must be closed before cycle selection is made.

2.Press fabric setting key pad for the wash cycle desired. After the cycle is started, the time will display and count down.

General Information

Scrolling ‘out of order’ showing in display, followed by a failure code

This condition indicates the washer is inoperative.

“0 Minutes” showing in display

This condition indicates the washer cannot be operated. Coins dropped or debit inputs during this condition will be stored in escrow but cannot be used until normal operation is restored by opening and closing the door. If a door switch fails, it must be replaced before normal operation can be restored.

Cold Start (initial first use)

Washer is programmed at the factory as follows:

■14-minute wash period

■3 rinses (extra rinse not enabled)

■7 x coin 1 wash price (PD models)

Warm Start (after power failure)

A few seconds after power is restored, if a cycle was in progress at the time of the power failure, “RESELECT CYCLE” will flash in the display, indicating the need for a key press to restart washer.

Door Lock

The door will be locked when the cycle starts. The door will remain locked until the end of a cycle or approximately 2 minutes after a power interruption.

MAH22PDAGW0, MAH22PNAGW0 specifications

The Maytag MAH22PNAGW0 and MAH22PDAGW0 are high-efficiency front-loading washing machines that offer robust features and cutting-edge technologies designed to enhance your laundry experience. Known for their durability and performance, these models from Maytag are engineered to tackle tough stains and provide optimal cleaning results.

One of the standout features of both models is the PowerWash cycle, which utilizes a combination of extra agitation and a thorough rinse to effectively eliminate stubborn stains and deeply embedded dirt. This cycle ensures that your laundry comes out looking fresh and clean, even with heavily soiled items. Another key feature is the Heavy Duty cycle, which is specifically designed for washing bulky items and heavy fabrics, such as towels and bedding. This cycle provides the necessary cleaning power while being gentle on garments.

Both models also cater to user convenience through their advanced control panel featuring an intuitive interface. Users can easily select from various cycles, including Normal, Delicate, and Eco, allowing for flexibility based on laundry needs. The machines also feature a time-saving Quick Wash cycle, which delivers clean clothes in less time, making it ideal for busy households.

In terms of energy efficiency, the MAH22PNAGW0 and MAH22PDAGW0 are Energy Star certified, meaning they consume less water and electricity compared to traditional models. This efficiency not only leads to lower utility bills but also promotes a more sustainable lifestyle.

A notable characteristic of both washers is their stainless steel wash basket, which resists chipping and snagging, providing a gentle yet effective cleaning environment. The machines also come equipped with Maytag’s Direct Drive motor, which minimizes vibrations and noise, ensuring a quieter operation even during the spin cycle.

Additionally, the models offer a combination of a rear-drain pump and vented design, which helps to improve drainage and reduce the risk of mold and mildew buildup.

Overall, Maytag continues to uphold its reputation for reliability and quality with the MAH22PNAGW0 and MAH22PDAGW0, making these washing machines a great choice for any household looking for efficiency, power, and convenience in their laundry routine.