D 
Water Level 
button
During the Memory and Synthetic programs the washing machine will detect the size
of the laundry and automatically select the water level between levels 4, 6, 8 or 10. 
To change the water level, press the Start/Pause button and make your selection.
Press the Start/Pause button to start the machine, it will not set the water level automatically.
If there is water inside the tub the machine cannot detect the laundry load and will display water level "6". If wet laundry is put in the machine, it will display level "3",
the water level can be adjusted. |
| |
If Quick program is selected | it will display water level 3 | the water level can |
be adjusted |
|
|
If Tub Dry program is selected | the water level will not respond | |
During operation of the wash, rinse or soak program, you can adjust the water level by pressing the Water Level button.
The water level may vary due to the different moisture level of the laundry items.
E Delay button
The display shows the time remaining (in minutes) before the cycle will finish.
Push the "Delay" button and the display will show the remaining time for the cycle to finish (in hours). The indicator flashes to indicate that the delay function is operating.
Delay start
Delay time is the delay till the wash finishes.
F Wash Rinse Spin button
You may change the Wash, Rinse and Spin times when Memory , Heavy Normal and Synthetic cycles are selected.
When the Wool cycle has been selected you cannot change the Wash, Rinse and Spin times.
You can not change the Wash Rinse and Spin times when Tub dry and Quick cycles are selected.
10