Haier HWMP55-918 user manual Install the drain hose

Page 7
Drain hose neck
Drain hose hoop
Drain hose joint

Install the drain hose

Install the drain hose

First install the drain hose hook on the part of outer drain hose component.

Put the drain hose clamp on the outer drain hose, Insert the outer drain hose into the joint for it, and then clutch tightly with drain hose hoop.

4-4.Usage of the drain hose

Ensure the drain hose is mounted at a suitable height.

(Between 800-1200mm above the floor).

Do not push it too far down the drain pipe or siphoning will occur.

0.8mh1.2m

5

Image 7
Contents This manual is for HWMP55-918 Contents Parts Meaning and description of symbolsSafety precautions Safety precautions Adjust the position Installation and adjustmentInstall the lint filter Install the bottom plateInstall the drain hose Install the drain hoseRemove the water inlet hose Install the water inlet hosePreparation before washing Preparation before washingAdding washing powder Load the laundryDetergent Close the lidSTART/PAUSE button OperationTempWash/Rinse button Water Level button Delay buttonWash Rinse Spin button Cycle button Operation buttons and descriptions6Press 7Press Cycle completedMaintenance Problem Possible causes What to do Trouble-shootingSituation Common occurrencesName Packing listQuantity Storage position Type Specification