2.Load the laundry
The rated washing capacity refers to the largest dry weight of a load that can be washed.
The thickness, size and type of clothes will influence the actual capacity. Be careful to only load a reasonable amount of laundry. Do not select more than 4 water level for clothes less than 1.0kg, to avoid splashing of water
It is suggested not to use high sudsing detergent.Choose a low suds or high efficiency detergent.
3. Detergent
How to use whitener
Fill water to desired level. Dilute the whitener in a container. Pour it slowly into the washing tub.
Avoid using whitener on laundry with color or pattern as they are prone to lose color.
The whitener shall not touch the laundry directly.
Refer to the whitener instructions for the usage and quantity.
For powder whitener,please 
dissolve it before using .
Adding washing powder
It is suggested to dissolve the detergent before you put them into the tub, see as below:
1.Prepare warm water of 35 C and container.
2. Add washing powder while stirring to dissolve it
completely.
Add washing powder into the box directly under fuzzy program and reserve program.
Dissolve directly inside the washing machine: (not applicable for fuzzy and reserve program)
1.Add some water(select the " L " water level) 2.Add washing powder. Run for about 30s to fully
dissolve the powder. Then push the"start/pause" button.
3.Put in laundries. Select suitable water level. Push the "start/pause"button again.
Please add suitable washing powder as per the
laundries quantity, then set water level and water quantity.
If you select save program, it is suggested to use liquid detergent instead of washing powder to guarantee the washing effect.
It is not recommended to use
Washing powder with poor quality or
Note: For the better wash performance, please use lowing sudsing or hign efficiency detergent and please dissolve the detergent in 1L warm water first
4. Close the lid
If you open the lid during spinning the machine will stop and an alarm will sound.
8