Haier HWM90-98 user manual Safety precautions

Page 3

Safety precautions

Before Usingi

Please plug the power plug on special receptacle. Be sure to use three-pins power receptacle. Ensure that the earthing prong of the power receptacle is earthed reliably. Use leakage protector if possible.

Earth

The washing machine must be positioned so that the plug is accessible. Be sure to pull the

p l u g o ff a n d c l o s e t h e w a t e r f a u c e t i n following cases: power failure, delivering the machine, setting the machine idle or c l e a n i n g t h e m a c h i n e . D o n o t p l u g o r p u l l t h e p o w e r p l u g w i t h w e t h a n d .

Do not bend ,extend,twist,bind by force.Do not press or nip it with weight.

Keep the pin of the power plug clean,if the power plug is polluted with dust,please wipe with dry cloth carefully.

If the power cord or the power plug is bad, to avoid risk it is required to have it replaced by the technicians of our special shop or the after-sale service department.

In case the washing machine is installed on ground with

Do not use water hotter than 50

carpet, do not block the ventilation hole with carpet.

 

T h e v e n t i l a t i o n holes at the bottom

Soft object

Do not put the machine at damp place like

Do not wash water-proof laundries like

the bathroom. Never wash it with water. Do

the raincoat, bike covers etc. to avoid

not put wet laundries on the control panel.

abnormal vibrations in spinning.

 

 

 

 

Do not let the machine share one receptacle with other electric appliances. If the plugging into the receptacle is loose, do not use the plug any more.

1

Image 3
Contents HWM90-98 ContentsPage Safety precautions Dismantle Install Safety precautionsInstall the inner cover components Before UsingHow to change the direction of the drain hose Before UsingiConfirm the water faucet Install the water inlet hose Before UsingiConnection between the water inlet hose and the washer Preparation before washing Usingi process Put in the laundries Usingi processPage Description of the function of the buttons Using i processStart/Pause button Push the Power ON/OFF button to switch on the power Press Water Level button Select suitable water level Finish washing Close the top lidDisposal after washing Usingi process Phenomena Reason How to settle Trouble-shooting answer to questionPacking list Specification table