1 Preparation before washing Usingi process
Preparation before washing
1.Connect the water inlet hose. Open the water faucet.
2.Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. The earth terminal shall not link to gas pipeline and faucet water pipeline.
3.Put down the drain hose.
Pay attention to following before washing
Check if the laundries has special requi- rement on w- ashing
Clear the pocket. Take out the coi- ns, sand, hairpins etc.
Tie the long strips; fasten the buttons; close zippers.
The quantity of the laundries shall not be too large. Stretch and loosen the laundries before putting them in the tub.
When the pulsator is running, the but- tons of the laundri- es may cause noi- se. For the sake of discretion, please put the laundries with buttons into other laundries.
a. Check if the laundries are applicable for washing with machine. b. Divide the laundries that are not colorfast from other laundries. c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil, please apply detergent on them in advance, which can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn it over before putting in.
f. Do not put those laundries polluted by chemicals into the washing machine directly.
7