Usingi process
*Total time: including the normal water inlet time and drain time. The total washing time may be influenced by the water inlet pressure and water level.
*Spin time: From the moment the intermittent spinning starts to the moment it stops running (the time displayed on spin digitron is from intermittent spinning to the moment before inertia spinning; the time displayed on the time remain digitron is the total remained time)
*In selecting "posthaste" program, the washing machine will set the complete procedures of water level selectior, washing, rinsing and spinning automatically.
*During saving water program, if the water inlet pressure is lower, the machine will come into rinse with water .
*When selecting soak procedure, it will first soak for 10~40 minutes , then do washing , rinsing and spinning .
Push the "reserve" button to select suitable reserve wash program 
RESERVE
After switching on the power, the reserve program is set to off mode automatically. If you need to set the washing 
procedure to be finished at reserved time, please push the " RESERVE " button to set the reserve wash program. Refer to RESERVE button in Page 11 for selection. Page
Confirm the operation of reserve program
When the "reserve" function is activated, the indicator light of the program you have set will be off. The remained time will be displayed. During reserve procedure, push the "RESERVE" button to display the reserve mode.
To change the running program or cancel the reserve setting, you need to switch off the power and make new selection.
Push the "START/PAUSE" button
5 Close the top lid
As the top lid opened ,the Washer will automatically give an alarm and stop running , exclusively during supplying water and rinsing.
6 Finish washing
After finishing wash 
it'll switch off the power automatically.
14