Haier HWM70-A Push the Current button to select suitable water current, About About 21~17 Fast

START

PAUSE

6 The washing is finished.

It beeps to indicate the

finishing of washing

The power will be switched off automatically after the finishing of the washing.

The washing will be finished after 18 hours.

Reserve time from 2 to 24 hours

Using process

Water Level and Time Table of Each Program

Program	Water	Wash	Rinse (minute)	Spin	Total time (minute)
	level	(minute)		(minute)	Soak included	Soak excluded
Standard			Rinse twice	About 5~6	About 83~45	About 48~30
Night			Spray twice,	About 6~8	About 99~55	About 65~40
			rinse once
Gentle			Rinse once	About 2		About 21~17
Fast	About 4	About 3	Rinse once	About 2		About 10

*Total time: including the normal water inlet time and drain time.

*Wash time: adjustable according to the water temperature automatically.

*Spin time: the time from intermittent running to finishing

*The standard and night programs can have SOAK procedure. After water inlet, it will first perform soaking for about 15-35 minutes along with slightly pulsator stirring, and then do washing.

*The washing finishing time may be influenced by the water inlet pressure.

6 Push the CURRENT button to select suitable water current

After the power is switched on, the washing machine can set the current automatically according to the laundries. If you

need to select current by yourself, please push the CURRENT button. Refer to CURRENT in Page 10 for details.

Page 10

7 Push the RESERVE button to select suitable reserve wash program RESERVE

After the power is switched on, the reserve program is set to off mode automatically. If you need to set the washing procedure to be finished at reserved time, please push the RESERVE button to set the reserve wash program. Refer to RESERVE BUTTON in Page 11 for selection.

Confirm the operation of reserve program

When the RESERVE function is activated, the indicator of the program you have set will be off. The RESERVE (HOUR) and TIME REMAIN indicators will be on. During reserve procedure, you can push the RESERVE button to display the reserve mode.

To change the running program or cancel the reserve setting, you need to switch off the power and make new selection.

8 Push the START/PAUSE button

5 Close the top lid.

If you open the top lid, the machine will stop working before spinning.