Haier HWM70-A user manual Safety precautions

Page 3

Safety precautions

Before using

Please insert the power cord into special receptacle with rated voltage.Be sure to use single-phase three pins receptacle. The earthing terminal must be earthed reliably.If possible,please adopt electric leakage protector.

Earth

In normal usage of the washing machine, the power plug shall be ready to be pulled or plugged with hand. Be sure to pull the plug off and close the water faucet in following cases: power failure, delivering the machine, setting the machine idle or c l e a n i n g t h e m a c h i n e . D o n o t p l u g or pull the power plug with wet hand.

Do not bend, stretch, twist, bind the power cord by force,

or reform it. Do not press or clamp it with heavy items. If the power cord and power plug are bad, or the receptacle is loose, be sure to have it replaced by the technicians of our special shop or our agent, or the after-sale service department for the sake of avoiding any risk. Keep the prong of the power plug clean. If dust is found on the power plug, please wipe it off with dry cloth.

In case the washing machine is installed on ground with carpet, be careful not to block the ventilation hole with carpet.

The ventilation holes at the bottom

Do not use water with temperature higher than 50 inside the tub.

Do not set the machine at damp place like the bathroom. Never wash it with water. Do not put wet laundries on the control panel coating.

Do not wash water-proof laundries like the raincoat, bike covers, down textiles etc. to avoid abnormal vibrations in spinning and damaging the laundries.

Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use it any more.

Image 3
Contents Fuzzy Computeried Automatic Washing Machine Pieces Bottom platePiece Water inlet hoseSafety precautions Safety precautions Confirm its horizontal Install the bottom plateAdjust the installation position Adjust the adjustable legHow to change the direction of the drain hose Install the lint filterInstall the water inlet pipe Install the water inlet hose Before UsingSlider till a click sound is heard Dismount the water inlet hose1Preparation before washing Using process Put in the laundries Using process How to use the washing powder Add the detergent and softener Using processWater Inlet button Mode and meaning of the indicatorDescription of the function of the operation buttons Balance displayProgram button Power ON/OFF buttonSTART/PAUSE button Select buttonPush the select button to select suitable procedure Push the Power ON/OFF button to switch on the powerProcedure selection method Push the Water Inlet button to select water inlet modeStandard Rinse twice About 5~6 About 83~45 About 48~30 Push the Current button to select suitable water currentPush the START/PAUSE button Water Level and Time Table of Each ProgramDismount Install Dismount and install Clean Disposal After Washing Using processCommon phenomena Phenomenon Reason How to solveLint filter Inside the accessory bagName Quantity Storage position Inside the document bagRated voltage frequency 220V ~ 60Hz Model