Haier HWM70-A Disposal After Washing Using process, Dismount Install Dismount and install Clean

Page 17

7 Disposal After Washing Using process

Please take off the detergent box and wash it with water	Lint filter:
1.How to take it off: Pull it upwards slantingly and gently.	1.Pull it up to dismount.
2.How to install: Put it in from the top slantingly, then push	2.Push it down to install it.
it in to the right position.	3.After washing, clean the filter screen

Dismount

Install

Dismount and install

Clean

The filter screen is likely to be blocked by foreign materials and influence water inlet. Please clean it with brush frequently.

If the cabinet is dirty, wipe it with wet soft cloth Do not wash with water directly.

Wipe with neutral detergent.

Do not wipe with thinner, petrol, alcohol, etc.

1.After washing, close the water faucet. (If desired, dismount the water inlet hose).

2.Do not store water in the washing machine for a long period. Drain the water completely after each using.

3.Be sure to pull off the power plug before maintenance. 4.Hang up the power cord and drain hose.

5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (about 1 hour), then close the top lid.

Image 17

Contents Fuzzy Computeried Automatic Washing Machine Piece Bottom plateWater inlet hose PiecesSafety precautions Safety precautions Adjust the installation position Install the bottom plateAdjust the adjustable leg Confirm its horizontalHow to change the direction of the drain hose Install the lint filterInstall the water inlet pipe Install the water inlet hose Before UsingSlider till a click sound is heard Dismount the water inlet hose1Preparation before washing Using process Put in the laundries Using process How to use the washing powder Add the detergent and softener Using processDescription of the function of the operation buttons Mode and meaning of the indicatorBalance display Water Inlet buttonSTART/PAUSE button Power ON/OFF buttonSelect button Program buttonPush the select button to select suitable procedure Push the Power ON/OFF button to switch on the powerProcedure selection method Push the Water Inlet button to select water inlet modePush the START/PAUSE button Push the Current button to select suitable water currentWater Level and Time Table of Each Program Standard Rinse twice About 5~6 About 83~45 About 48~30Dismount Install Dismount and install Clean Disposal After Washing Using processCommon phenomena Phenomenon Reason How to solveName Quantity Storage position Inside the accessory bagInside the document bag Lint filterRated voltage frequency 220V ~ 60Hz Model