Safety precautions | Before using |
Please install and adjust the machine according to the requirement of the manual, which is very important for you to operate the machine safely and properly.
Install the bottom plate
After opening the package, please lean the washing machine gently down on soft items (like towel cloth, blanket, etc.). Install the bottom plate to the bottom of the machine with eight screws by a cross screwdriver, then lift the machine up gently. See to the figure:
Back
Front
Bottom plate | Screw | Soft item |
|
|
Adjust the installation position
The largest allowable slope of the shank base of the machine is 2 
. The slanting or rough 
ground will result in unstable running or 
stoppage of the machine. Please adjust it with 
following methods:
Confirm it's horizontal:
Air bubble
If the bulb of the level meter at the balance display position is inside the standard circle, it indicates that the machine is horizontal. Otherwise you need to a d j u s t t h e a d j u s t a b l e l e g o f t h e m a c h i n e .
Adjust the adjustable leg:
1.To twist the adjustable leg, please first lift up the leg side slightly, loosen the adjustable nut, and then twist the leg.
2.After adjustment, fasten the nut.
Suitable Not suitable
Standard circle
Adjustable nut
Loosen
Fasten
High | Low Adjustable leg |
3