Washing Methods
Operational Functions
1. Laundry loading
Evenly load the laundry in the washing machine and then tightly close the door of the washing machine
Note: 1) When first using the washing machine, let it run un- loaded for one program to pre- vent the laundry from being tainted by oil or dirty water from the washing machine. 2) Do not overload the washing machine.
Reference loading |
| ||
=Overalls | =Jeans (800g) | ||
(cotton 950g) |
|
| |
=Blended |
| Pajamas (200g) | |
|
| ||
fabric clothes |
|
| |
(800g) |
| ====Shirts | |
=shirt |
| (300g) | |
| ===Underwear | ||
(cotton |
| ||
| (blended fabrics 70g) | ||
300g) |
| ||
| =Socks | ||
=====Jackets |
| ||
(blended fabrics 50g) | |||
(cotton 800g) | |||
| =Single bed sheets | ||
= Woolen blankets | |||
| (3000g) | (cotton 800g) | |
|
| ||
D No spin button
When this button is pressed, the spin cycle will be spared but water drain is still available. This function is useful for hard ironing fabrics, such as chemical fiber and wool fabrics.
E Economic wash button
Pressing this button will reduce the consumption of water during bleaching under intense wash. It is recommended that this
program be used when doing a small laundry load.
2. Use of detergent
Pull out the detergent drawer, put required detergent, soften- ing agent and bleaching agent into the corresponding boxes. Push back the drawer gently.
Caution: 1) Do not add liquid detergent into box 1 and 2
2)For
3)Do not overuse softening agent as this may damage artificial fabrics.
3.Washing program setting
Set the wash program correctly in accordance with the laundry load.the methods for setting wash programs are indicated on the handle of the distributor on the washing machine.turn the program knob clockwise to the desired program.
Caution: Turn off the power before setting the wash program.
Do not forget to reduce the amount of detergent used.
F Power button
| ON |
Press the button ,washing machine will working;release the button,the | OFF |
washing machine will stop. |
G Power light
The light will illuminates when the power supply is connected.
10 | 7 |