Technical Specification
Item | Model | |
| ||
Power supply |
| 220V~(50Hz) |
Maximum working current | (A) | 10 |
Water pressure | (MPa) | 0.05 P 1 IPX4 |
Washing power | (W) | 330 |
Spinning power | (W) | 650 |
Max. washing load | (kg) | 5 |
Spinning speed | (r/min) | 600 |
Washing program |
| 14 |
Heating power | (W) | 1950 |
|
| |
Size (HXDXW) | (mm) | 850x550x595 |
|
| |
Weight | (kg) | 76 |
|
| |
|
|
|
Matters Needing Attention
3. Never place heavy objects ,a heating | 4. Do not wash foam rubber or similar sponge |
applianceor a water container on the top panel | materials. |
of the washing machine. |
|
5. Before washing, do up zippers, buttons , | 6. Do not open the detergent box during |
laces and repair damaged areas,under- | the wash cycle. |
wear or small articals should be placed |
|
in the laundry bag or a pillowslip. |
|
Do not wash clothes containing wire |
|
frames. |
|
7. The door is fitted with a | 8. After washing, turn off the tap to prevent |
will not open until 2~3 minutes after the wash- | leakage; unplug the washing machine |
ing machine stops. Do not force the door | and wipe clean the lower part of the port |
open. Do not open the door when water level | hole. |
reaches the port hole. |
|
9.Keep the door slightly open when the washing machine is not being used. Never cover the machine with a plastic sheet.
14 | 3 |